Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements

Download results of this page

Perfeziona per:

Tipo di contenuto

Progetto (541)
Sintesi della relazione (9)


Belgio (57)
Danimarca (1)
Francia (110)
Germania (149)
Grecia (7)
Italia (109)
Lussemburgo (30)
Paesi Bassi (26)
Portogallo (8)
Regno Unito (121)
Spagna (43)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 550
12 3 4 5 6 7 8 9 10 > >| 
ID: 7210-KB/314
Data di inizio: 1990-07-01, Termine: 1993-06-30
The objective of this research is to determine, on a macroscopic scale, the influence of specific parameters, notably pH, on the propagation of corrosion under paint films as well as their adhesion to the substrate. The mechanisms responsible for the blistering of paint are co...
Record Number: 7169
Last updated on: 2002-12-13
ID: 7210-EC/601
Data di inizio: 1987-07-01, Termine: 1990-06-30
Objective of this research is to draw up a description, as complete as possible, of the mechanism of strip tracking and from there, by way of modelling and simulations of the dynamics, determine the influence of variations of the process variables and to devise optimal control...
Record Number: 6767
Last updated on: 2002-12-13
Within this research project 9 steels of varying strength and toughness have been investigated by different test procedures in order to examine differences in the failure behaviour of high strength steels. A major topic was the investigation concerning the influence of temper...
Record Number: 3711
Last updated on: 1998-03-12
[SINTESI DELLA RELAZIONE] Electrochemical immersion sensors
Deoxidation of steel melts by aluminium, manganese or chromium was investigated using the solid electrolyte measuring technique. New types of electrochemical immersion sensors were developed and successfully applied for direct determination of these elements in liquid steel. ...
Record Number: 8787
Last updated on: 1998-03-10
Inductively coupled plasma mass spectrometry (ICP-MS) has become a powerful analytical technique especially for the determination of trace amounts of metals. The applicability of ICP-MS to the analysis of steel samples has been investigated. The analyte ion response can be int...
Record Number: 7667
Last updated on: 2003-01-17
In tin plate production, cold rolled strip undergoes alkaline electrodegreasing. After batch annealing, coloured staining of strip edges may be observed. These differences in surface aspect between axis and edges of the strip can be very detrimental to the end product as they ...
Record Number: 8668
Last updated on: 1998-03-18
Research has been concentrated on T91 steels in the form of thick plates and on the behaviour of welds in hydrogen atmospheres. Acceptable properties were confirmed in plates up to 300 mm thick and the weldability was shown to be equivalent to that of 2.25 chromium1molybdenum ...
Record Number: 8672
Last updated on: 1998-03-18
[SINTESI DELLA RELAZIONE] Ferritic rolling of ULC steels
Ferritic rolling at low temperature (less than 800 C) in the finishing mill appears to be an economical way to produce a thin and extra soft hot strip. The operating costs can be lowerwhen compared to the conventional austenitic practice. The laboratory studies and the indust...
Record Number: 8667
Last updated on: 1998-03-18
An accelerated expansion test has been developed which gives a good indication of the likely behaviour of low density (LD) slags used as an unbound aggregate. The test produces a result within 24 h. These results were compared with road performance. 3 samples of LD slag were ...
Record Number: 8641
Last updated on: 1998-02-10
[SINTESI DELLA RELAZIONE] Instrumental analysis of ferroalloys
Research was carried out into the development of operating systems for accurate X-ray fluorescence (XRD) analysis of major elements and minor elements in ferroalloys. Samples were prepared following 3 different procedures: obtention of metal samples by remelting in an inductio...
Record Number: 7661
Last updated on: 1998-01-16
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-08-21