Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements

Download results of this page

Perfeziona per:

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 12
Order by: Results/page:
12 > 
High volume piezoelectric thin film production process for microsystems
ID: 229196
Data di inizio: 2010-01-01, Termine: 2012-12-31
This proposal will address high volume production of MEMS (Micro-Electro Mechanical Systems) with a piezoelectric thin film as active element (piezoMEMS). This technology can fulfil many of the requirements of sensors and actuators in tomorrow’s smart systems, as a result of ...
Programme: FP7-NMP
Record Number: 93862
Last updated on: 2017-05-25
Development of bio-based coating from tomato processing wastes intended for metal packaging
ID: 286446
Data di inizio: 2011-12-01, Termine: 2014-09-30
The goal of the project is to develop a bio-lacquer for the protection of metal food packaging to meet the demand for sustainable production and for the safeguarding of consumer health, at the same time increasing the competitiveness of the metal cans industry, valorizing the...
Programme: FP7-SME
Record Number: 101296
Last updated on: 2016-06-27
Implant Direct
[PROGETTO] Implant Direct - Implant Direct
ID: 286577
Data di inizio: 2012-09-01, Termine: 2014-08-31
ImplantDirect will create a cost-effective, faster manufacturing route for orthopaedic, maxillofacial or trauma implants, tailored to the individual needs of patients. The overall project aims are to improve the quality of the implants, reduce the recovery time, improve the q...
Programme: FP7-SME
Record Number: 104802
Last updated on: 2016-03-18
European Forum On New Glass Applications
ID: 13983
Data di inizio: 2005-06-01, Termine: 2009-05-31
We present a project of action in the field of glass science and technology which aims at coordinating all European groups working in fundamental and applied precompetitive research. The success of this project could be the basis for the establishment of a Network of Excellenc...
Programme: FP6-NMP
Record Number: 75384
Last updated on: 2009-12-15
Innovative combined material, production and fatigue design concepts for economic high-performance structural powder metallurgy components
ID: G5RD-CT-2001-00531
Data di inizio: 2002-01-01, Termine: 2006-12-31
The project addresses the Powder Metallurgy sector in the objective of expanding the limits and durability of structural materials. This extension will be into mass production of high-density, high-duty components for gearboxes of automotive transmissions and of power tools. T...
Programme: FP5-GROWTH
Record Number: 60143
Last updated on: 2006-06-13
Economical production of sige material for microelectronics and optoelectronics applications
ID: G5RD-CT-2001-00558
Data di inizio: 2001-09-01, Termine: 2004-08-31
The project will develop an economical, reliable 200/300 mm industrial tool for fabrication of SiGe pseudosubstrates by growing relaxed layers of SiGe on silicon wafers. The project will demonstrate that SiGe-PS can be used for the fabrication of high performant devices for Mi...
Programme: FP5-GROWTH
Record Number: 57421
Last updated on: 2005-04-12
Improvement of sevice life and reliability of cold forging tools with respect to fatigue damage due to cyclic plasticity (COLT)
ID: G5RD-CT-1999-00067
Data di inizio: 2000-02-01, Termine: 2003-01-31
Cold forging is the most efficient technology for mass production of high precision parts for transport, mechanical and electrical industries. There is a large potential for reducing the production costs in this industry by improving reliability of tools. The optimization pote...
Programme: FP5-GROWTH
Record Number: 51967
Last updated on: 2005-04-12
Low shrinkage materials for dental and ophthalmic applications
ID: G5RD-CT-2001-00554
Data di inizio: 2001-09-01, Termine: 2005-08-31
New materials shall be developed for use in dentistry or optics. The main demands are low shrinkage during processing and biocompatibility; in dentistry mechanical hardness and good optical quality (almost colorless, high cohesion and adhesion power) are most prominent, while ...
Programme: FP5-GROWTH
Record Number: 58190
Last updated on: 2005-04-12
ID: BRPR980679
Data di inizio: 1998-08-01, Termine: 2001-03-31
Programme: FP4-BRITE/EURAM 3
Record Number: 44830
Last updated on: 2004-01-05
ID: BRPR970549
Data di inizio: 1998-01-01, Termine: 2001-03-31
Programme: FP4-BRITE/EURAM 3
Record Number: 39783
Last updated on: 2003-06-06
12 > 
List retrieved on: 2018-03-17