Forschungs- & Entwicklungsinformationsdienst der Gemeinschaft - CORDIS

Algorithms for autonomous self-assembling

Probably the most characteristic capacity of the swarm-bot system is that it can self-assemble; that is, to move from a situation characterised by the activity of a number n>1 of s-bots to a situation in which these n s-bots physically connect to each other to form a swarm-bot. Self-assembling can enhance the efficiency of a group of autonomous cooperating s-bots in several different contexts.

Generally speaking, self-assembling is advantageous anytime it allows a group of agents to cope with environmental conditions which prevent them from carrying out their task individually. For example, s-bots, designed for all-terrain navigation, could make use of self-assembling to move in a particularly rough terrain by reducing the risk of toppling over, as well as to bridge the gap between the two sides of a trough larger than the body of a single robot, reducing the risk of falling in. In the context of object transport, a group of self-assembled s-bots might be capable of pushing/pulling an object which, due to its characteristics (e.g., mass, size, and shape), can not be transported by a single s-bot.

To develop controllers capable of letting s-bots self-assemble we used a perceptron-type neural network whose weights were evolved using an evolutionary algorithm. These controllers were synthesised in simulation using up to 5 simulated s-bots and then ported to the real s-bots. In short, self-assembly works as follows. The start of the process is triggered by the presence of an s-bot, which turns on its red lights. The s-bots which are closer to the red s-bot perceive the red light and approach it until they are close enough to connect by grasping the red s-bot ring with their gripper. If the connection is successful, they turn their red lights on so as to attract other s-bots. If an s-bot encounters difficulties during the approach phase, it launches a recovery procedure, which consists of the s-bot moving backward and approaching the red s-bot again.

Experiments have shown that this procedure can reliably control the s-bots so that they connect to each other or to a special luminous object, called s-toy, with red lights turned on. The procedure is scalable, as it works for increasing numbers of s-bots (experiments with up to 16 s-bots were run successfully), and robust, as it can control self-assembling s-bots moving on both flat and moderately rough terrain.

Verwandte Informationen

Ergebnis in Kürze

Reported by

Université Libre de Bruxelles
Ave. F. Roosevelt 50
1050 Brussels
See on map
Folgen Sie uns auf: RSS Facebook Twitter YouTube Verwaltet vom Amt für Veröffentlichungen der EU Nach oben