Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Results 1 - 10 of 1477
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
Towards advanced materials with improved physical characteristics
ID: G5ST-CT-2000-00230
Start date: 2000-12-20, End date: 2001-12-19
A completely innovative class of materials to protect machining and cutting tools will be developed in the course of the Project. The proposal is a market driven as only 40% of all the machining tools in Europe are wear protected, and the market requires novel technologies to ...
Programme: FP5-GROWTH
Record Number: 72393
Last updated on: 2005-04-12
Establishing a documented framework for over the net concurrent engineering and cooperation between large industrial auto and aeronautical companies and smes
ID: G1RD-CT-2002-00737
Start date: 2002-05-01, End date: 2005-04-30
Project NETFRAME (industrial internet framework), to be developed by a consortium that includes aeronautical companies, automotive industries and industry associations with a large membership of SMEs, addresses the issues of the intro?? of the networked engineering processes b...
Programme: FP5-GROWTH
Record Number: 62808
Last updated on: 2005-04-12
Improving the infrastructure for metrology in chemistry in the candidate new member states (QUA-NAS)
ID: G7RT-CT-2002-05110
Start date: 2003-02-01, End date: 2006-01-31
International trade is critically dependent on the comparability of analytical results. Reliable chemical measurements are necessary to support EU policies in areas like health care, food safety, workplace safety, consumer protection, environmental management etc. The main pur...
Programme: FP5-GROWTH
Record Number: 68062
Last updated on: 2005-04-12
Surface finish solution for leather upholstery
ID: G1ST-CT-2000-00088
Start date: 2000-05-15, End date: 2001-05-14
The aim is to develop novel technologies and systems which overcome the problem of colour dye transfer from fabrics to below the surface finish of leather upholstery during normal use. The objectives are to:-Identify the mechanisms which facilitate the transfer of colour dry/ ...
Programme: FP5-GROWTH
Record Number: 72354
Last updated on: 2005-04-12
Bond assisted single step assembly of aircraft structural components
ID: G4RD-CT-2002-00841
Start date: 2003-01-01, End date: 2005-12-31
This project aims at improving the "affordability" of aircraft by reducing recurring cost and non-recurring lead-time of components assembly. The BASSA "lean-manufacturing" concept will reduce the number of process steps. A room temperature curing adhesive with corrosion prote...
Programme: FP5-GROWTH
Record Number: 67447
Last updated on: 2005-12-09
Crashworthiness of helicopter on water: design of structures using advanced simulation tools
ID: G4RD-CT-2000-00178
Start date: 2000-04-01, End date: 2003-11-30
The objective of the project is to develop a set of simulation tools and design methodology, which permit cost effective design and entry-into-service of crashworthy (including impact on water) helicopters. In support of this the simulation tools that either do not exist or ne...
Programme: FP5-GROWTH
Record Number: 52827
Last updated on: 2005-04-12
A thematic network for quality and trust in the industrial application of computation fluid dynamics
ID: G1RT-CT-2000-05003
Start date: 2000-05-01, End date: 2004-07-31
CDF is potentially one of the most powerful generic technologies to evolve from academic research to widespread industrial application. Some regard CFD as an emerging technology whereas others view it as approaching maturity. However all will agree that it proves a notoriously...
Programme: FP5-GROWTH
Record Number: 51829
Last updated on: 2005-04-12
Grip force mapping for characterisation of hand-held vibrating tools (VIB-TOOL)
ID: G6RD-CT-2002-00843
Start date: 2002-12-01, End date: 2005-11-30
The goal is to improve repeatability and reproducibility of vibration tests carried out on hand-held power tools by means of arrays of polymeric capacitive pressure sensors used to map contact force and pressure. Scientific and technological objectives are: a) to develop senso...
Programme: FP5-GROWTH
Record Number: 67263
Last updated on: 2005-04-12
Wheel rail corrugation in urban transport
ID: G3RD-CT-2002-00807
Start date: 2002-06-01, End date: 2006-09-30
This project aims at developing solutions for the very expensive corrugation problem in metro and tram networks. Corrugation reduces the lifetime of rails and wheels, causes irritating emitted rolling noise and leads to safety concerns. The only efficient solution nowadays is ...
Programme: FP5-GROWTH
Record Number: 63087
Last updated on: 2006-06-13
A new concept for the economic wire-edm machining of high quality carbide tools
ID: G1RD-CT-2002-00774
Start date: 2002-06-01, End date: 2005-11-30
There is a need for more precise and fast production of carbide tools (punches) to be used for the mass production of geometrically complex and narrow toleranced sheet metal products (e.g. lead frames, motor laminates). Compare to grinding, the Wire-EDM machining process allow...
Programme: FP5-GROWTH
Record Number: 63075
Last updated on: 2005-04-12
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-08-18
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top