Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements

Download results of this page

Refine by:


Scientific Research (51)


FP7-JTI (51)


Austria (2)
Belgium (3)
Cyprus (1)
France (13)
Germany (10)
Greece (3)
Italy (11)
Netherlands (6)
Portugal (1)
Spain (19)
Sweden (6)
Switzerland (4)
United Kingdom (11)


English (51)

Advanced search

Results 1 - 10 of 51
Order by: Results/page:
12 3 4 5 6 > 
EPOCAL: an Electrical POwer Center for Aeronautical Loads
ID: 323408
Start date: 2013-03-01, End date: 2015-07-31
The main objective of the current proposal is the development of an Electrical Power Center (EPC) integrated with a devoted Control Console (CC), enhanced with advanced electrical power management strategies. The proposal is based on the following keypoints: 1) an Electrical ...
Programme: FP7-JTI
Record Number: 109133
Last updated on: 2017-03-27
Experimental TRansonic Investigations On Laminar flow and Load Alleviation
ID: 323460
Start date: 2013-01-01, End date: 2016-12-31
The proposal tackles the CfP JTI-CS-2012-1-GRA-02-019. Within the project a Wind-Tunnel-Model is designed, built and tested that is capable of being tested with two main purposes: - access the extend of laminarity on the wing - evaluate the performance of LC&A system in the t...
Programme: FP7-JTI
Record Number: 110468
Last updated on: 2017-02-21
Composite Pipes and Fittings for Aero-Engines Dressing
ID: 323514
Start date: 2012-11-01, End date: 2015-02-28
The object of this project is to update the concept of aero-engine dressing to the most advanced concepts already used in commercial aircrafts. The existing design concepts and components utilised within the engine dressings have remained largely static for a long period of t...
Programme: FP7-JTI
Record Number: 105682
Last updated on: 2016-09-12
Greater Operating Temperature Alloy
ID: 323378
Start date: 2012-10-01, End date: 2016-04-30
The objective of Greater Operating Temperature Alloy [GOTA] will be to select a titanium alloy capable of being fabricated into intermediate compressor casings, and enduring operating temperatures of at least 500 deg C in this service. Industrial manufacture of the selected a...
Programme: FP7-JTI
Record Number: 107161
Last updated on: 2016-07-18
Telemharsh - Telemetric System Acquisition in harsh Environment
ID: 323494
Start date: 2013-04-01, End date: 2016-09-30
Periodic preventive maintenance activities associated with aircraft subsystems is a significant part of the high costs associated with through life aircraft operations. Also, the understandably conservative approach to risk management, leads to premature component retirement,...
Programme: FP7-JTI
Record Number: 110469
Last updated on: 2016-06-20
Development of a readout circuit for a resonant accelerometer
ID: 323535
Start date: 2013-01-01, End date: 2015-03-31
"The purpose of the present project is to develop an ASIC implementing a readout interface for a resonant accelerometer. It is developed in response to the requirements described in the Clean Sky call for proposals referenced under CS-2012-01-SFWA-01-046 and the specification...
Programme: FP7-JTI
Record Number: 107015
Last updated on: 2016-05-09
Advanced Flight control system – Design Development and Manufacturing of an Electro Mechanical Actuator with associated Electronic Control Unit and Dedicated test Bench
ID: 323318
Start date: 2013-03-07, End date: 2016-07-06
The FLIGHT-EMAFLIGHT-EMA project will design, develop, manufacture, tune and validate an innovative and smart Electro-Mechanical Flight Control system primary Actuator focused towards the study and validation of a future oil less Power by Wire aircraft. FLIGHT-EMA actuator wi...
Programme: FP7-JTI
Record Number: 111098
Last updated on: 2016-04-11
Highly integrated ultra-low-noise Gyrometer solution for Smart Fixed Wing Aircraft
ID: 323522
Start date: 2012-12-01, End date: 2014-06-30
The GyroWing project is part of the global project “Smart Fixed Wing Aircraft” (SFWA), whose objectives address environmental issue (by increasing the performances of aircraft) and passenger comfort (in reducing noise level). GyroWing represents an ASIC which aims at integrat...
Programme: FP7-JTI
Record Number: 108822
Last updated on: 2016-03-31
Automated Chemical Stitching and Preforming
ID: 323485
Start date: 2012-10-01, End date: 2014-03-31
Today’s preforming technologies are largely manual, thus increasing the costs of Liquid Composite Molding (LCM) technologies such as Resin Transfer Moulding (RTM). Systems that can drape 3D profiles automatically and continuously, such as the one developed by FIBRE, have just...
Programme: FP7-JTI
Record Number: 106333
Last updated on: 2016-03-31
Icephobic Coatings - Development of test methods
ID: 323456
Start date: 2013-05-01, End date: 2014-12-31
Icephobic coatings are being investigated as functional coatings for laminar flow. The coatings are intended to support the wing ice protection systems by reducing the formation or adhesion of ice and consequently reducing the energy requirements of the system. Currently, the...
Programme: FP7-JTI
Record Number: 108847
Last updated on: 2016-03-31
12 3 4 5 6 > 
List retrieved on: 2018-10-17
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top