High load gear and bearings materials In order to accomplish reduction of fuel burn, emission and noise, very high bypass engines are foreseen in the aeronautical engine perspective. These engine layouts will need a speed reduction system between the low pressure turbine shaft and the fan, having the complete power flowing in the reduction system. Therefore, in order to allow the feasible installation in the engine, high power density gearboxes are foreseen. Classical aerospace materials, although performant, do not exhibit all the necessary technical characteristics order to fulfil both bearing and gears strength needs. Moreover higher oil temperature will characterise new gearboxes usage. The above requirements will focus the activities not only on ambient testing but also on high oil temperature condition.After joint selection activities of promising materials and surface treatments, the applicant will manage the procurement of bearing and gear test articles, perform testing activities on bearings also Permalink: https://cordis.europa.eu/programme/id/H2020_JTI-CS2-2016-CFP04-ENG-01-13 European Union, 2024 Ce site utilise des cookies pour améliorer votre navigation. J'accepte les cookies. Je refuse les cookies. Votre extraction de données est disponible Votre extraction de données avec l’ID de la tâche TASK_ID_PLACEHOLDER est disponible pour téléchargement Accéder à mes extractions de données Fermer DET Modal body ... Votre livret est prêt. Votre livret est prêt.Votre livret {{ title }} généré à {{ timestamp }} est disponible pour téléchargement.Le fichier restera disponible pendant {{ hours }} heures ou jusqu’à la fermeture de votre navigateur. Télécharger le livret Voir tous les livrets La génération de votre livret {{ title }} a échoué La génération de votre livret {{ title }} a échoué. Veuillez vérifier votre page Mon livret pour obtenir plus d’informations Voir tous les livrets