Obiettivo PASO aims at advancing manufacturing management technology in a commercially attractive area.Since the 1980ies manufacturers have been shifting from functional production arrangements towards product-based manufacturing shops and smaller organisational entities (lean management and group technology). These autonomous, small production shops and cells need visual, user-friendly scheduling and control systems, which can be customised and integrated with internal and external supplier networks. Other requirements like a more frequently restructuring of production facilities add further to this need.Today's tools for production planning and scheduling are not flexible enough, as most of them are fixed to a certain production structure. PASO aims at developing a software architecture for shop-control (reactive scheduling) which is independent of the production structure. It therefore should be possible to support almost any structure, organisation and scheduling algorithm.The innovative contribution of PASO is not based on sophisticated algorithms but rather on a new, flexible software concept with benefits for both the end-user and the system provider. A prototype shop-control system based on the envisaged shop-control kernel, as well as a set of shell modules will demonstrate and validate the feasibility of the concept.The advantages of the targeted system can be summarised as follows:- customisable in a very high degree, allowing incremental upsizing;- low cost system,- easy to use, simple, with illustrative user interface,- simplified system administration (only PC know-how required);- expandability and openings; Campo scientifico natural sciencescomputer and information sciencessoftwareengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemssocial scienceseconomics and businesseconomicsproduction economics Programma(i) FP4-ESPRIT 4 - Specific research and technological development programme in the field of information technologies, 1994-1998 Argomento(i) 8.12 - Intelligent Production Systems and Equipment Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore A. Ahistrom Corporation, Shistrom Machinery, Savonlinna Works Contributo UE Nessun dato Indirizzo 57101 Savonlinna Finlandia Mostra sulla mappa Costo totale Nessun dato Partecipanti (8) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto Asociacion de Investigacion Tekniker Spagna Contributo UE Nessun dato Indirizzo Otaola 20 20600 Eibar Mostra sulla mappa Costo totale Nessun dato Ccp - Centre de Cim de Porto Portogallo Contributo UE Nessun dato Indirizzo Rua De Aurelia De Sousa 171 4000 Porto Mostra sulla mappa Costo totale Nessun dato Extech Irlanda Contributo UE Nessun dato Indirizzo Lismoyle House, Merchants Road Galway Mostra sulla mappa Costo totale Nessun dato Institute of Production Engineering and Machine Tools (Ifw) Germania Contributo UE Nessun dato Indirizzo Schlosswender Strasse 5 30159 Hannover Mostra sulla mappa Costo totale Nessun dato Jaz-Zubiaurre Sa Spagna Contributo UE Nessun dato Indirizzo Asuerreka 7 20600 Eibar Mostra sulla mappa Costo totale Nessun dato Telleria, Valdubieco, Azaola Spagna Contributo UE Nessun dato Indirizzo Zeharkalea S/N 48260 Ermua Mostra sulla mappa Costo totale Nessun dato Vtt Automation Finlandia Contributo UE Nessun dato Indirizzo Espoo Mostra sulla mappa Costo totale Nessun dato Wm-Data Systia Oy Finlandia Contributo UE Nessun dato Indirizzo Ilmarisentie 20 15200 Lahti Mostra sulla mappa Costo totale Nessun dato