Ziel
Aim of the EEM450PR project is to continue the engagement of the European semiconductor equipment and materials industry in the 450mm wafer size transition that started with the ENIAC JU EEMI450 initiative. It will also bring about the start of a vision to place an equipment development pilot line in the imec facility in Leuven. This will provide Europe with a complementary activity for 450mm equipment, and later on sub 10nm process development.
The consortium comprises 34 members (from 10 different European countries); 11 are SMEs and 4 are research institutes.
The main objective of the work on lithography is the proof of concept at test bench level of 450 mm critical wafer stage technology to get prepared for 450 mm early lithography prototype realization in a subsequent phase.
The work on materials is the follow-up activity of the EEMI450 project to reach the next level of 450mm wafer quality. To be able to produce these wafers with the required capabilities new sophisticated equipment for the Chemical Mechanical Polishing process step as well as very advanced equipment for final cleaning procedures will be developed and will be integrated in a 450mm wafer line.
Next to technology development also a 450mm equipment development pilot line facility will be prepared by developing state-of-the-art facilities readiness, including stringent energy and contamination considerations taking recent ISMI Guidelines, Semi Standards and ITRS requirements and activities into account.
Furthermore, work will be done on the development of pilotline-ready equipment and modules, and further optimization of prototypes, concerning front-end (wafer based) semiconductor processing. The companies that were involved in the ENIAC EEMI450 project will use the results obtained therein for further development of their respective equipment.
Finally, metrology equipment performance will be enhanced to improve the current 300mm cost of ownership for 12nm technology control on 450mm wafers.
Wissenschaftliches Gebiet
Programm/Programme
Aufforderung zur Vorschlagseinreichung
ENIAC-2011-2
Andere Projekte für diesen Aufruf anzeigen
Koordinator
5504DR Veldhoven
Niederlande
Auf der Karte ansehen
Beteiligte (31)
01237 DRESDEN
Auf der Karte ansehen
76705 Rehovot
Auf der Karte ansehen
8610 Uster
Auf der Karte ansehen
1322 AP ALMERE
Auf der Karte ansehen
73614 SCHORNDORF
Auf der Karte ansehen
Auf der Karte ansehen
4782 St Florian Am Inn
Auf der Karte ansehen
5651 GG Eindhoven
Auf der Karte ansehen
80686 Munchen
Auf der Karte ansehen
HANAU
Auf der Karte ansehen
89160 Dornstadt
Auf der Karte ansehen
85551 Heimstetten
Auf der Karte ansehen
OX2 0JX Oxford
Auf der Karte ansehen
3001 Leuven
Auf der Karte ansehen
. LEIXLIP KILDARE
Auf der Karte ansehen
2306990 Migdal Haemek
Auf der Karte ansehen
23100 Migdal Haemek
Auf der Karte ansehen
9500 Villach
Auf der Karte ansehen
1322 AP Almere
Auf der Karte ansehen
70499 STUTTGART
Auf der Karte ansehen
85716 Unterschleissheim
Auf der Karte ansehen
1059 CM Amsterdam
Auf der Karte ansehen
2595 DA Den Haag
Auf der Karte ansehen
76100 REHOVOT
Auf der Karte ansehen
OX13 5QX Abingdon
Auf der Karte ansehen
5656 AG Eindhoven
Auf der Karte ansehen
31700 Blagnac
Auf der Karte ansehen
4365104 Ra Anana
Auf der Karte ansehen
63868 GROSSEWALLSTADT
Auf der Karte ansehen
81677 Munchen
Auf der Karte ansehen
5705 CS Helmond
Auf der Karte ansehen