Skip to main content
European Commission logo print header

Technology development and fabrication of Integrated solid-state Power Switches

Objective

"PRIMES has been created as a legal and independant entity, inheriting the successful experience of PEARL Laboratory. This has allowed to give to the structure a wide and strong international visibility as one of the best European technological platform specialized in power integration.
PRIMES puts a huge effort in developing virtual model solutions for power electronics components and systems, combined to a prototyping and characterization platform to be able to design, simulate, manufacture and characterize new power module technological demonstrators at the same place.
PRIMES bondwire-less technology with double-sided semiconductor cooling has been demonstrated for high power devices. Such technology is centered on the use of bumps for connecting the surface side of vertical power components and enables a significant improvement in power density as compared with standard IGBT modules. Chips interconnection is ensured by flat substrates both on the bottom and on the top side; additional bumps are inserted on the sides of the structure to enhance mechanical stiffness and reduce stress at device level; after proper insulation, the structure is apt for double-sided cooling, with improved performance of the semiconductor devices.
The results of the project will be produced under license by the aPSI3D start-up, created in order to have a European manufacturer abble to produce specific integrated power modules.
The results will be protected by patents or spreadly disseminated through international conferencies and publications."

Call for proposal

SP1-JTI-CS-2013-02
See other projects for this call

Coordinator

PRIMES
EU contribution
€ 401 130,00
Address
67 BOULEVARD PIERRE RENAUDET
65000 TARBES
France

See on map

Activity type
Other
Administrative Contact
Estelle Grall (Ms.)
Links
Total cost
No data