New aerospace advanced cost effective materials and rapid manufacturing technologies

Livrables

Numerical models of individual materials and processes

This deliverable will be a technical report describing algorithms numerical procedures and software modules developedenhanced for the modelling of the materials TiAl and general procedures of modelling RM and laserassisted machining processes respectively

RM Test Part

A test part will be defined containing typical features from all demonstrators This will be used to assess the build strategies and parameter sets Depends on D11

End User requirements

This deliverable will be a report describing the KPIs covering technological/scientific as well as environmental and economic requirements contained in a KPI matrix

Final ethics report
Report, gender policy and H&S

Report on the gender and diversity policy in the project, including actions to be taken taking ethical considerations into account, gender balance in project and methods taken to address any issue which arise.

Multi-scale models of the process chain

This deliverable will be a technical report describing algorithms numerical procedures and software modules developedenhanced for coupling and linking modelling at different lengthscales and the general procedure of modelling the whole process chain

Website available

A public website will be available with a document repository for partners. Basic project information will be included, to be expanded as the project progresses

Website fully updated

All the publishable work carried out during the project will be available on the website, including a description of all results.

Publications

FRF Estimation through Sweep Milling Force Excitation (SMFE)

Auteurs: A. Iglesias, J. Munoa, C. Ramírez, J. Ciurana, Z. Dombovari
Publié dans: Procedia CIRP, Numéro 46, 2016, Page(s) 504-507, ISSN 2212-8271
Éditeur: Springer
DOI: 10.1016/j.procir.2016.04.019

Integrated, multidisciplinary approaches for micro-manufacturing research, and new opportunities and challenges to micro-manufacturing

Auteurs: Yi Qin
Publié dans: Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, Numéro 232/1, 2018, Page(s) 5-21, ISSN 2397-7914
Éditeur: IMechE
DOI: 10.1177/2397791417750350

Characterisation of titanium aluminide components manufactured by laser metal deposition

Auteurs: A.R.C. Sharman, J.I. Hughes, K. Ridgway
Publié dans: Intermetallics, Numéro 93, 2018, Page(s) 89-92, ISSN 0966-9795
Éditeur: Elsevier BV
DOI: 10.1016/j.intermet.2017.11.013

Hardware-in-the-loop simulator for stability study in orthogonal cutting

Auteurs: I. Mancisidor, X. Beudaert, A. Etxebarria, R. Barcena, J. Munoa, J. Jugo
Publié dans: Control Engineering Practice, Numéro 44, 2015, Page(s) 31-44, ISSN 0967-0661
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.conengprac.2015.07.006

Ultimate capability of variable pitch milling cutters

Auteurs: Gabor Stepan, David Hajdu, Alex Iglesias, Denes Takacs, Zoltan Dombovari
Publié dans: CIRP Annals, Numéro 67/1, 2018, Page(s) 373-376, ISSN 0007-8506
Éditeur: Hallwag AG
DOI: 10.1016/j.cirp.2018.03.005

Optimum Selection of Variable Pitch for Chatter Suppression in Face Milling Operations

Auteurs: Alex Iglesias, Zoltan Dombovari, German Gonzalez, Jokin Munoa, Gabor Stepan
Publié dans: Materials, Numéro 12/1, 2019, Page(s) 112, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma12010112

Simulation of thermal behaviours and powder flow for direct laser metal deposition process

Auteurs: Quanren Zeng, Yankang Tian, Zhenhai Xu, Yi Qin
Publié dans: MATEC Web of Conferences, Numéro 190, 2018, Page(s) 02001, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201819002001

Study of the Tuning of Variable Pitch Milling Cutters

Auteurs: Dombovari , Zoltan; Iglesias , Alexander; Stépán , Gábor
Publié dans: http://www.confercare.manchester.ac.uk/events/matador2017/, Numéro 2, 2017
Éditeur: Springer

Numerical modelling of the gas-powder flow during the laser metal deposition for additive manufacturing

Auteurs: Zeng, Quanren; Tian, Yankang; Xu, Zhenhai; Qin, Yi
Publié dans: 15th International Conference on Manufacturing Research, Numéro 1, 2017
Éditeur: IOS Press
DOI: 10.5281/zenodo.820051

Advancement in Additive Manufacturing & Numerical Modelling Considerations of Direct Energy Deposition Process

Auteurs: Zeng Q, Xu Z, Tian Y and Qin Y
Publié dans: The Proceeding of the 14th International Conference on Manufacturing Research, 2016, Page(s) 104-109, ISBN 978-1-61499-668-2
Éditeur: IOS Press
DOI: 10.3233/978-1-61499-668-2-104

Livrables

Publications

Partager cette page

Télécharger