Risultati finali
Design-Knowledge Platform/Expert System - 2nd Prototype, including advanced functionality and User Interface
Ecoeffiency analysis with second life supply for at least 2 processes and products conducted
Dissemination planSpecific process knowledge on foam injection moulding
Description of specific process knowledge on foam injection moulding for the production of multi-layer 2D geometries out of virgin and waste based materials.
Report on material flow management and standardised transportation processesReport summarising the evaluation of different possibilities of transportation, along with the description of a concept for the material flow and quantities in dependence to available machines, trial plans and amount of testing.
Guidelines for part and specimen characterisation and circular testingReport describing Guidelines for part and specimen characterisation and circular testing
Fundamental process knowledge on rotational mouldingDescription of fundamental process knowledge on rotational moulding for the production of 2D geometries
Final Public Project ReportFinal Public Report detailing project achievements, concrete results and exploitation potential
Pubblicazioni
Autori:
Löhner, M.; Drummer, D.
Pubblicato in:
SPE ANTEC 2017, 2017
Editore:
ANTEC
Autori:
Muhammad Tausif, Tom O’Haire, Achilles Pliakas, Parikshit Goswami, Stephen J. Russell
Pubblicato in:
AUTEX World Textile Conference 2016, Numero 16th, 2016, ISBN 978-961-6900-17-1
Editore:
University of Ljubljana, Faculty of Sciences and Engineering, Department of Textiles, Graphic Arts and Design
Autori:
Muhammad Tausif, Achilles Pliakas, Tom O’Haire, Parikshit Goswami, Stephen J. Russell
Pubblicato in:
Materials, Numero 10/6, 2017, Pagina/e 618, ISSN 1996-1944
Editore:
MDPI Open Access Publishing
DOI:
10.3390/ma10060618
Autori:
Martin Löhner, Dietmar Drummer
Pubblicato in:
Journal of Polymer Engineering, Numero 0/0, 2016, ISSN 0334-6447
Editore:
Freund Publishing House Ltd.
DOI:
10.1515/polyeng-2016-0175
Autori:
Martin Löhner, Dietmar Drummer
Pubblicato in:
Journal of Polymers, Numero 2016, 2016, Pagina/e 1-11, ISSN 2356-7570
Editore:
Hindawi Publishing Corporation
DOI:
10.1155/2016/5768453
Autori:
Martin Löhner, Dietmar Drummer
Pubblicato in:
Zeitschrift Kunststofftechnik, Numero 01/2017, 2017, ISSN 1864-2217
Editore:
Carl Hanser Verlag GmbH & Co.
Autori:
Löhner, M.
Pubblicato in:
2017, ISBN 978-3931-864712
Editore:
University Erlangen-Nuremberg
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile