Leistungen
Synthesis report on task 2.4 about the mechanical resistance of ablated wall under high heat flux
Methodology - SynthesisSynthesis report about the updated methodology for demonstration of In-Vessel melt retention
Final report on simulant stratified poolInterim report on heat transfer within stratified molten pool with simulant materials, performed at KTH (POMECO facility)
3rd periodic reportSummary of activities and main results obtained during the third year of the project
Review of baffling of the vesselFinal report on baffling of the vessel (design, efficiency, optimization)
Final report on critical scenariosFinal report on task 5.1 – Options to reduce the probability of critical scenarios
Final project reportSummary of activities and main results obtained during the whole project
2nd periodic reportSummary of activities and main results obtained during the second year of the project
Final report on top coolingFinal report on direct cooling of the top metal layer performed in KTH facility
Review of alternative innovationsSynthesis report on benefits of several innovations to improve IVMR success
Final report on melt propertiesFinal report on melt properties measurements performed in CEA facilities
Influence of oxidation and fluid properties on boiling and CHF: Results of the CNU-M1 and ANUBIS testsReport on CERES tests
Final report on complementary experiments on the CERES facilities (MTA-EK)
Report on the use of CFDSynthesis report on task 2.3 about the use of CFD for simulation of stratified molten pool or external cooling.
Minutes of the kick-off meetingSummary of initial discussions and presentations about the objectives of the project and the contributions of participants.
Report on modellingSynthesis report on task 2.2 about modelling and improvement of codes
Synthesis report on spray coolingSynthesis report on RPV spray cooling for IVMR and recommendations for system design.
Final report on oxide conductivityFinal report on measurements of heat conductivity of the solid oxide phase performed in ITU facility
Synthesis report on corium pool behaviourFinal report on physicochemical phenomena in corium debris and molten pool
Final report on innovationsPreliminary report on spray cooling
State-of-the-art review of spray cooling and heat transfer models and feasibility study report
Review of instrumentation for SAMGFinal report on instrumention to monitor the IVMR management
First periodic reportSummary of activities and main results obtained during the first year of the project
Communication action PlanCommunication action Plan (CAP)
Review of spray coolingFinal report on spray cooling (existing options, design, efficiency)
Final report on core refloodFinal report on the effect of core re-flood
Results of the PIRT on phenomena relevant for IVR modellingDescription of the method to establish the rankings and conclusions of the ranking
Final report on full scale testsFinal report on full scale geometry tests (2D slice) performed at UJV
Report on experimental study of spray coolingSynthesis report on experimental study of CHF and post dry heat transfer with spray water cooling of downward inclined vessel steel surface (performed at KTH)
Review of vessel coatingFinal report on the efficiency of various vessel coatings
Final report on core debris coolabilityFinal report on the effect of partially melted debris re-flood performed in PEAL and PRELUDE facilities (IRSN)
Final report on the large scale cold-crucible experimentFinal report on the measurements of heat flux between the vessel wall and the stratified molten pool performed in the large scale cold-crucible experiment at CVR
Final report on small scale testsFinal report of small scale experimental results performed at UJV
Review of active passive/injection systemsFinal report on the review of active/passive in-vessel injection systems
Creation of IVMR website
Veröffentlichungen
Autoren:
F. Fichot, L. Carénini, M. Sangiorgi, S. Hermsmeyer, A. Miassoedov, S. Bechta, J. Zdarek, D. Guenadou
Veröffentlicht in:
Annals of Nuclear Energy, Ausgabe 119, 2018, Seite(n) 36-45, ISSN 0306-4549
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.03.040
Autoren:
R. Gencheva, A. Stefanova, P. Groudev
Veröffentlicht in:
Annals of Nuclear Energy, Ausgabe 81, 2015, Seite(n) 207-212, ISSN 0306-4549
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2015.02.039
Autoren:
L. Carénini, F. Fichot, N. Seignour
Veröffentlicht in:
Annals of Nuclear Energy, Ausgabe 118, 2018, Seite(n) 363-374, ISSN 0306-4549
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.04.032
Autoren:
R. Gencheva, A. Stefanova, P. Groudev, B. Chatterjee, D. Mukhopadhyay
Veröffentlicht in:
Nuclear Engineering and Design, Ausgabe 298, 2016, Seite(n) 208-217, ISSN 0029-5493
Herausgeber:
Elsevier BV
DOI:
10.1016/j.nucengdes.2015.12.031
Autoren:
Didier Jacquemain, Didier Vola, Renaud Meignen, Jean-Michel Bonnet, Florian Fichot, Emmanuel Raimond, Marc Barrachin
Veröffentlicht in:
Nuclear Technology, Ausgabe 196/2, 2016, Seite(n) 161-174, ISSN 0029-5450
Herausgeber:
American Nuclear Society
DOI:
10.13182/NT16-13
Autoren:
Peter Matejovic, Miroslav Barnak, Milan Bachraty, Lubomir Vranka, Robert Berky
Veröffentlicht in:
Nuclear Engineering and Design, Ausgabe 314, 2017, Seite(n) 93-109, ISSN 0029-5493
Herausgeber:
Elsevier BV
DOI:
10.1016/j.nucengdes.2017.01.015
Autoren:
Afaque Shams
Veröffentlicht in:
Annals of Nuclear Energy, Ausgabe 117, 2018, Seite(n) 234-246, ISSN 0306-4549
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2018.03.031
Autoren:
Mindaugas Valinčius, Tadas Kaliatka, Algirdas Kaliatka, Eugenijus Ušpuras
Veröffentlicht in:
Science and Technology of Nuclear Installations, Ausgabe 2018, 2018, Seite(n) 1-14, ISSN 1687-6075
Herausgeber:
Hindawi Publishing Corporation
DOI:
10.1155/2018/7162387
Autoren:
Alice Seibert, Dragos Staicu, David Bottomley, Marco Cologna, Jacobus Boshoven, Herwin Hein, Emthetal Kassim, Sarah Nourry, Markus Ernstberger, Davide Robba, Rudy Konings
Veröffentlicht in:
Journal of Nuclear Materials, Ausgabe 520, 2019, Seite(n) 165-177, ISSN 0022-3115
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jnucmat.2019.04.019
Autoren:
Adrien Pivano, Pascal Piluso, Nourdine Chikhi, Jules Delacroix, Pascal Fouquart, Romain Le Tellier
Veröffentlicht in:
Nuclear Engineering and Design, Ausgabe 355, 2019, Seite(n) 110271, ISSN 0029-5493
Herausgeber:
Elsevier BV
DOI:
10.1016/j.nucengdes.2019.110271
Autoren:
N. Chikhi, P. Fouquart, J. Delacroix, P. Piluso
Veröffentlicht in:
Nuclear Technology, Ausgabe 205/1-2, 2018, Seite(n) 200-212, ISSN 0029-5450
Herausgeber:
American Nuclear Society
DOI:
10.1080/00295450.2018.1486160
Autoren:
L. Carénini, F. Fichot, N. Bakouta, A. Filippov, R. Le Tellier, L. Viot, I. Melnikov, P. Pandazis
Veröffentlicht in:
Annals of Nuclear Energy, Ausgabe 146, 2020, Seite(n) 107612, ISSN 0306-4549
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2020.107612
Autoren:
Xiaoyang Gaus-Liu, Thomas Cron, Beatrix Fluhrer
Veröffentlicht in:
Nuclear Technology, 2020, Seite(n) 1-12, ISSN 0029-5450
Herausgeber:
American Nuclear Society
DOI:
10.1080/00295450.2020.1743102
Autoren:
F. Fichot, L. Carénini, N. Bakouta, H. Esmaili, L. Humphries, T. Laato, R. Le Tellier, L. Saas, I. Melnikov, P. Pandazis, S. Weber, R.J. Park, A. Filippov, V. Strizhov
Veröffentlicht in:
Annals of Nuclear Energy, Ausgabe 146, 2020, Seite(n) 107617, ISSN 0306-4549
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.anucene.2020.107617
Autoren:
Shambhavi Nandan, Florian Fichot, Bruno Piar
Veröffentlicht in:
Nuclear Engineering and Design, Ausgabe 364, 2020, Seite(n) 110608, ISSN 0029-5493
Herausgeber:
Elsevier BV
DOI:
10.1016/j.nucengdes.2020.110608
Autoren:
L. Carénini, F. Fichot
Veröffentlicht in:
Volume 4: Computational Fluid Dynamics (CFD) and Coupled Codes; Decontamination and Decommissioning, Radiation Protection, Shielding, and Waste Management; Workforce Development, Nuclear Education and Public Acceptance; Mitigation Strategies for Beyond Design Basis Events; Risk Management, 2016, Seite(n) V004T13A009, ISBN 978-0-7918-5004-6
Herausgeber:
ASME
DOI:
10.1115/ICONE24-60598
Autoren:
F. Fichot, L. Carénini, W. Villanueva, S. Bechta
Veröffentlicht in:
Volume 7: Decontamination and Decommissioning, Radiation Protection, and Waste Management; Mitigation Strategies for Beyond Design Basis Events, 2018, Seite(n) V007T11A014, ISBN 978-0-7918-5151-7
Herausgeber:
ASME
DOI:
10.1115/icone26-82248
Autoren:
D. B. Lopukh, I. N. Skrigan, A. V. Vavilov, A. P. Martynov, S. V. Bechta, A. A. Komlev
Veröffentlicht in:
2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon), 2018, Seite(n) 1-6, ISBN 978-1-5386-9535-7
Herausgeber:
IEEE
DOI:
10.1109/fareastcon.2018.8602779
Autoren:
L. Carénini, F. Fichot
Veröffentlicht in:
Volume 7: Decontamination and Decommissioning, Radiation Protection, and Waste Management; Mitigation Strategies for Beyond Design Basis Events, 2018, Seite(n) V007T11A013, ISBN 978-0-7918-5151-7
Herausgeber:
ASME
DOI:
10.1115/icone26-82243
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor