Obiettivo The project proposal is aimed at light weight and efficient jet-fuel aerospace propulsion units based on reciprocating engines. Aerospace propellers useful for jet-fuel reciprocating direct drive engines suffer by extreme excitation of vibrations. The objective of the project proposal is to design and test a new propeller useful for such operational conditions. The objective will be achieved by the following steps:1. Definition of propeller design specifications with respect to the increased level of vibration excitation due to the specific characteristic of the direct drive jet-fuel reciprocating engines.2. Design of the propeller and its parts and equipment with respect to the increased level of vibrations.3. Production of the propeller system.4. Engine testing of the propeller to demonstrate the achievements.During the first step an already existing propeller will be used for strain-gage measurements on an equivalent AVGAS engine and then of the target jet-fuel engine. Based on the measured differences of stress distribution and its cyclic components the new technical specifications will be established. Based on them a suitable propeller system will be designed, produced and tested.WOODCOMP staff has 25 years long experience in the development and serial production of propellers for reciprocating engines. WOODCOMP is approved by EASA and national CAA for design, production, testing and maintenance activities. JIHOSTROJ is a company experienced and approved for design and production of propeller governors. VZLU is a research and testing establishment with more than 90 years experience and tradition in aerospace activities. Campo scientifico engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftsocial sciencespolitical sciencespolitical transitionsrevolutionsengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineeringengineering and technologyenvironmental engineeringenergy and fuels Programma(i) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.5. - ITD Engines Argomento(i) JTI-CS2-2015-CFP02-ENG-04-05 - Powerplant Shaft Dynamic and associated damping system Invito a presentare proposte H2020-CS2-CFP02-2015-01 Vedi altri progetti per questo bando Meccanismo di finanziamento CS2-IA - Innovation action Coordinatore WOODCOMP PROPELLERS SRO Contribution nette de l'UE € 208 270,00 Indirizzo VODOLSKA 4 DOLINEK 250 70 ODOLENA VODA Cechia Mostra sulla mappa PMI L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione. Sì Regione Česko Střední Čechy Středočeský kraj Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Collegamenti Contatta l’organizzazione Opens in new window Partecipazione a programmi di R&I dell'UE Opens in new window Rete di collaborazione HORIZON Opens in new window Costo totale € 297 528,75 Partecipanti (2) Classifica in ordine alfabetico Classifica per Contributo netto dell'UE Espandi tutto Riduci tutto VYZKUMNY A ZKUSEBNI LETECKY USTAV AS Cechia Contribution nette de l'UE € 178 627,00 Indirizzo LETNANY BERANOVYCH 130 19000 Praha 18 Mostra sulla mappa Regione Česko Praha Hlavní město Praha Tipo di attività Research Organisations Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Partecipazione a programmi di R&I dell'UE Opens in new window Rete di collaborazione HORIZON Opens in new window Costo totale € 178 627,50 JIHOSTROJ AS Cechia Contribution nette de l'UE € 33 598,00 Indirizzo BUDEJOVICKA 148 382 32 VELESIN Mostra sulla mappa Regione Česko Jihozápad Jihočeský kraj Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Partecipazione a programmi di R&I dell'UE Opens in new window Rete di collaborazione HORIZON Opens in new window Costo totale € 47 997,50