Obiettivo HOT STRIP MADE FROM NON-ALLOYED PERLITIC STEELS IS USED MAINLY AS MATERIAL FOR COLD STRIP. THE SOFT-ANNEALED COLD STRIP IS THEN COLD-WORKED TO PRODUCE STRUCTURAL ELEMENTS WHICH ARE SUBSEQUENTLY HARDENED. THESE STEELS HAVE A NUMBER OF CONTACT POINTS FOR CONTROLLING THE STRUCTURE AND THUS MECHANICAL PROPERTIES WHICH HAVE BEEN RELATIVELY UNDERUSED IN THE PAST IN THE PRODUCTION OF HOT STRIP. IT IS, THEREFORE, CONCEIVABLE THAT VARIOUS LEVELS OF STRENGTH COULD BE ACHIEVED IN THE BROAD RANGE BETWEEN 650 AND 1100 N/MM TO THE POWER OF 2 BY MEANS OF CONTROLLING THE WORKING AND COOLING CONDITIONS IN THE STRIP MILL. THE PROJECT ENVISAGES THE EXAMINATION OF THE EFFECT OF WORKING AND COOLING CONDITIONS AS A FUNCTION OF THE CONDITIONS IN THE HOT STRIP MILL USING THE HOT WORKING SIMULATION TESTS AND INDICATING WAYS IN WHICH DEFINED LEVELS OF STRENGTH CAN BE PRODUCED BY MEANS OF CONTROLLED STRUCTURES. THE VARIOUS CATEGORIES OF HOT STRIP WILL BE EXAMINED FOR THEIR COLD ROLLABILITY ACCORDING TO STRENGTH LEVEL. SUBSEQUENTLY, LABORATORY TESTS WILL DETERMINE THE EFFECT OF HOT STRIP STRUCTURES ON THE COLD WORKABILITY OF SOFT-ANNEALED COLD STRIP. IT IS HOPED TO ACHIEVE THE FOLLOWING TECHNICAL PROGRESS AS A RESULT OF THE TEST : (A) IMPROVED PRODUCTION OF HOT STRIP FROM THE POINT OF VIEW OF FURTHER WORKING, (B) THE STANDARDIZATION OF STRUCTURES WITH GIVEN COMBINATIONS OF STRENGTH AND DUTILITY WHICH WILL PROVIDE IMPROVED COLD WORKABILITY AFTER SOFT ANNEALING. Programma(i) ECSC-STEELRES 7C - Medium-term guidelines (ECSC) "technical steel research", 1986-1990 Argomento(i) Data not available Invito a presentare proposte Data not available Meccanismo di finanziamento Data not available Coordinatore MAX-PLANCK-INSTITUT FÜR EISENFORSCHUNG GMBH Contributo UE Nessun dato Indirizzo Max-Planck-Strasse 1 DÜSSELDORF Germania Mostra sulla mappa Costo totale Nessun dato
