Texture control in rolled steel sheets for an optimised anisotropy

Project Information

Grant agreement ID: 7210-EC-214

Project closed

Start date 1 July 1996

End date 30 June 1999

Funded under

• Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Total cost € 1 459 500,00

EU contribution € 875 700,00

Coordinated by

CENTRE DE RECHERCHES METALLURGIQUES
Belgium

Objective

The objective of the project is to analyze the influence of processing parameters at hot and cold mills on the texture development during annealing (batch or continuous) in order to establish guidelines for the control of r and delta r values, thus ensuring minimal planar anisotropy in cold rolled and annealed steel sheets. Steel grades to be considered are drawing grades (ultra-low C, extra-low C and IF steels) and high strength steels. Steel draw ability will be assessed as a function of the balance between r and delta r.

Programme(s)

• ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Topic(s)

• D3 - Physical metallurgy of rolling and finishing

Call for proposal

Data not available

Funding Scheme

CSC - Cost-sharing contracts

Coordinator

CENTRE DE RECHERCHES METALLURGIQUES

• EU contribution: No data
• Address: Rue Ernest Solvay, 11 ; 4000 LIEGE ; Belgium
• Total cost: No data

Participants (4)

CENTRO DE ESTUDIOS E INVESTIGACIONES TECNICAS DE GUIPUZKOA

Spain

• EU contribution: No data
• Address: M. de Manuel Lardizábal, 15 Barrio de Ibaeta ; 20018 SAN SEBASTIAN
• Total cost: No data

CENTRO SVILUPPO MATERIALI SPA

Italy

• EU contribution: No data
• Address: Via di Castel Romano 100/102 ; 00128 ROMA EUR
• Total cost: No data

CSI-PLANOS

Spain

• EU contribution: No data
• Address: C/ Carmen 2 ; 48901 BARACALDO (VIZCAYA)
• Total cost: No data

THYSSEN KRUPP STAHL

Germany

• EU contribution: No data
• Address: Kaiser-Wilhelmstrasse 100 ; 47166 DUISBURG
• Total cost: No data