Obiettivo This research is intended to develop an industrially applicable non-destructive method for examining surface defects in beams making it possible to quantify the defects at depth and to achieve a minimum detection threshold of 0.3 mm. The research will therefore concentrate on applying the method of ultrasonically generated surface waves which was adopted after an intensive preliminary study in which ARBED analysed and tested the techniques of Foucault currents, video recording, visual detection and the inductive heating approach combined with IR cameras. With the results of this work it will be possible to create a fully-automated (robotized) inspection line for cold-rolled beams and subsequently for hot-rolled beams. Programma(i) ECSC-STEELRES 7C - Medium-term guidelines (ECSC) "technical steel research", 1986-1990 Argomento(i) E1 - NDT technology and measurement Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore ARBED RECHERCHES Contributo UE Nessun dato Indirizzo 4009 ESCH-SUR-ALZETTE Lussemburgo Mostra sulla mappa Costo totale Nessun dato Partecipanti (1) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto Fraunhofer-Gesellschaft zur Förderung der Angewandten Forschung eV (FhG) Germania Contributo UE Nessun dato Indirizzo Universitätsgelände Gebäude 37 66123 Saarbrücken Mostra sulla mappa Costo totale Nessun dato
