Obiettivo RESISTANCE SPOT WELDING IS ONE OF THE MOST WIDELY EMPLOYED PROCESSES IN THE MASS PRODUCTION INDUSTRIES FOR THE JOINING OF THIN SHEET. IN SPITE OF THIS THERE IS LIMITED STANDARDIZATION REGARDING QUALITY CONTROL PROCEDURES, ASSESSMENT OF WELD QUALITY AND MEASUREMENT OF WELDING PARAMETERS. THE DIFFICULTY IN PRODUCING STANDARDS CAN BE ATTRIBUTED TO LACK OF INFORMATION IN TWO MAIN AREAS. FIRSTLY, THERE ARE NO STANDARDIZATION OF TECHNIQUES TO MEASURE EITHER WELD CURRENT OR THE DIAMETER OF A WELD WHICH HAS BEEN PEEL TESTED. SECONDLY, THE INFLUENCE OF THE ELECTRICAL AND MECHANICAL CHARACTERISTICS OF RESISTANCE WELDING EQUIPMENT ON WELDABILITY IS NOT CLEARLY UNDERSTOOD. THE OBJECTIVES OF THE PROPOSED WORK ARE TO ATTEMPT TO CLARIFY THESE ISSUES FOR UNCOATED LOW CARBON AND HIGH STRENGTH STEELS AND THUS PERMIT THE WRITING OF REALISTIC STANDARDS. Programma(i) ECSC-STEELRES 6C - Medium-term orientation (ECSC) "steel research in relation to the General Objectives for Steel", 1981-1985 Argomento(i) Data not available Invito a presentare proposte Data not available Meccanismo di finanziamento Data not available Coordinatore THE WELDING INSTITUTE Contributo UE Nessun dato Indirizzo Granta Park, Great Abington CB1 6AL CAMBRIDGE Regno Unito Mostra sulla mappa Costo totale Nessun dato Partecipanti (1) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto HOOGOVENS GROEP BV Paesi Bassi Contributo UE Nessun dato Indirizzo IJMUIDEN Mostra sulla mappa Costo totale Nessun dato
