Stress corrosion cracking of weldable microalloyed steels

Project Information

Grant agreement ID: 7210-KB-934

Project closed

Start date 1 July 1992

End date 30 June 1995

Funded under

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Total cost € 852 859,00

EU contribution € 475 119,00

Coordinated by

UNIVERSIDAD DE CANTABRIA
Spain

Objective

This research is aimed at studying the factors, which are important in the susceptibility to stress corrosion cracking of high strength weldable microalloyed steels. The steels considered are X60 and X70 with low carbon contents as well as higher carbon microalloyed steels which are used in the heat-treated condition. Each steel will be considered under conditions contributing to SCC and the results will be applied to existing models of SCC behaviour.

Programme(s)

• ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Topic(s)

• F2 - Corrosion

Call for proposal

Data not available

Funding Scheme

CSC - Cost-sharing contracts

Coordinator

UNIVERSIDAD DE CANTABRIA

• EU contribution: No data
• Address: Avenida de los Castros s/n ; 39005 SANTANDER ; Spain
• Total cost: No data

Participants (3)

CNRS-LABORATOIRE DE METALLURGIE STRUCTURALE

France

• EU contribution: No data
• Address: Université de Paris-Sud Centre d'Orsay - 15 Av. Georges Clémenceau ; 91405 ORSAY CEDEX
• Total cost: No data

CREUSOT-LOIRE INDUSTRIE

France

• EU contribution: No data
• Address: USINE DU CREUSOT 56, rue Clémenceau ; 71202 LE CREUSOT
• Total cost: No data

ENSIDESA

Spain

• EU contribution: No data
• Address: 33480 AVILES
• Total cost: No data