LOW- AND MEDIUM- CARBON WELDING STEELS.

Projektinformationen

ID Finanzhilfevereinbarung: 7210-MA-415

Startdatum 1 Oktober 1984

Enddatum 30 September 1988

Finanziert unter

• Medium-term orientation (ECSC) "steel research in relation to the General Objectives for Steel", 1981-1985

Gesamtkosten € 0,00

EU-Beitrag Keine Daten

Koordiniert durch

MATERIALS RESEARCH CENTRE
Italy

Ziel

IT IS KNOWN THAT THE RESISTANCE OF METALS TO ABRASIVE WEAR IS DEPENDENT NOT ONLY ON MACROHARDNESS BUT ALSO ON MICROSTRUCTURAL PARAMETERS OF THE MATERIAL SUCH AS MICROSTRUCTURAL HOMOGENEITY AND HETEROGENEITY, DISTRIBUTION OF HARD PHASES, TOUGHNESS, BRITTLENESS, ETC.

AS A RESULT THERE IS A GROWING INTEREST IN THE USE OF DUAL-PHASE STEELS SINCE THEY POSSESS THOUGHNESS AND THE MECHANICAL STRENGTH IN A PARTICULARLY SATISFACTORY COMBINATION. IN PARTICULAR EXTENSIVE RESEARCH ACTIVITIES HAVE BEEN LAUNCHED UNDER THE AUSPICES OF THE ECSC WITH THE AIM OF DEVELOPING HIGH-CARBON DUAL-PHASE STEELS.

MARKET RESEARCH, HOWEVER, SHOWS THAT THERE IS AT PRESENT A STRONG DEMAND FOR STEEL PLATE (ESPECIALLY LIGHT PLATE) POSSESSING HIGH WEAR RESISTANCE AND, IN ADDITION, SATISFACTORY WELDABILITY AND PLIABILITY.

FOR THESE REASONS IT IS ESSENTIAL TO ARRANGE FOR A PROGRAMME OF RESEARCH INTO THE POSSIBILITY OF DEVELOPING DUAL-PHASE STEELS WITH A MAXIMUM CARBON CONTENT OF 0.3 % WHICH POSSESS THE ABOVE MENTIONED PROPERTIES IN THE MOST SUITABLE COMBINATION.

Programm/Programme

• ECSC-STEELRES 6C - Medium-term orientation (ECSC) "steel research in relation to the General Objectives for Steel", 1981-1985

Thema/Themen

Data not available

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

Data not available

Koordinator

MATERIALS RESEARCH CENTRE

• EU-Beitrag: Keine Daten
• Adresse: Via di Castel Romano 100/102 ; 00128 ROMA ; Italien
• Gesamtkosten: Keine Daten