Objectif The project PILOT aims to develop two types of formulation technologies classes; a new UV hybrid varnish, which will combine the use of organic and silicone epoxy materials cured by the UV technology and a new hybrid solgel coating, where organic/silicone networks are reinforced by using colloidal particles of silica. Both technologies can be applied on a final paint scheme, but each of them has their particularities in terms of formulation, application and final properties. These differences will allow to cover a very large range of possibilities and will increase the chance of success of this project.The approach of the project is to get an efficient optically transparent multifunctional clear coat, which will able to protect the surface of the wings of business jet or HTP. While keeping the laminar flow, the technical solutions will have the capacity to:• Protect the substrate against contamination• Protect the substrate against icing formation• Resist to the erosion• Resist to the UV degradation• Dissipate the electrostatic charges• Be easily repairedTo reach the target of the project, the consortium considers two different technologies, which have already shown their ability to match with Aerospatiale needs. For each approach, an existing solution has been selected. Several properties, according to the technical requirements, have been already tested. The project PILOT will fine tune them in order to fulfil the technical specifications. The project will start with a bibliographic study, whose objectives are to make a state of the art of the last updated technologies, a legislation survey, a screening of the commercial raw material in order to design the update formulations coatings. Then, based on the literature, the coatings will be formulated and applied on the required substrates, taking into account industrial constraints. Finally, coatings will be characterized to validate the required functionalities, defined in the topic. Champ scientifique natural sciencesphysical scienceselectromagnetism and electronicsnatural scienceschemical sciencespolymer sciencespolyurethaneengineering and technologymaterials engineeringcoating and filmsengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering Programme(s) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.4. - ITD Airframe Thème(s) JTI-CS2-2016-CFP03-AIR-01-15 - Functional top coat for natural laminar flow Appel à propositions H2020-CS2-CFP03-2016-01 Voir d’autres projets de cet appel Régime de financement CS2-IA - Innovation action Coordinateur RESCOLL Contribution nette de l'UE € 399 481,00 Adresse ALLEE GEOFFROY SAINT HILAIRE 8 CS 30021 33600 Pessac France Voir sur la carte PME L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention. Oui Région Nouvelle-Aquitaine Aquitaine Gironde Type d’activité Private for-profit entities (excluding Higher or Secondary Education Establishments) Liens Contacter l’organisation Opens in new window Site web Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total € 465 398,75 Participants (3) Trier par ordre alphabétique Trier par contribution nette de l'UE Tout développer Tout réduire Tiers Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses. LABORATOIRE D ANALYSE CHIMIQUE ET ESSAI MATERIAUX France Contribution nette de l'UE € 40 000,00 Adresse 21 AVENUE LUCIEN LEROUSSEAU 33130 BEGLES Voir sur la carte PME L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention. Oui Région Nouvelle-Aquitaine Aquitaine Gironde Type d’activité Private for-profit entities (excluding Higher or Secondary Education Establishments) Liens Contacter l’organisation Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total € 65 446,25 ELKEM SILICONES FRANCE SAS France Contribution nette de l'UE € 228 415,25 Adresse AVENUE GEORGES POMPIDOU 21 69003 Lyon Voir sur la carte Région Auvergne-Rhône-Alpes Rhône-Alpes Rhône Type d’activité Private for-profit entities (excluding Higher or Secondary Education Establishments) Liens Contacter l’organisation Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total € 326 307,50 INSTITUT DE RECHERCHE DES REVETEMENTS, PEINTURES ET ENCRES Participation terminée Belgique Contribution nette de l'UE € 0,00 Adresse AVENUE REYERS 80 1030 BRUXELLES Voir sur la carte PME L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention. Oui Région Région de Bruxelles-Capitale/Brussels Hoofdstedelijk Gewest Région de Bruxelles-Capitale/ Brussels Hoofdstedelijk Gewest Arr. de Bruxelles-Capitale/Arr. Brussel-Hoofdstad Type d’activité Research Organisations Liens Contacter l’organisation Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total Aucune donnée