Objectif
CO2 from the flue gases of a rotary kiln in a cement industry (CO2: 25 vol%) will be used for the production of value-added chemicals (acid additives for cement formulations) and materials (CaCO3 nanoparticles to be used as concrete fillers). A circular-economy-approach is enabled: the CO2 produced by cement manufacturing is re-used in a significant part within the plant itself to produce better cement-related products entailing less energy intensity and related CO2 emissions by a quadratic effect.
Ionic liquids (bare or amine-functionalised) will be the key technological playground for the efficient and cost-effective (<30 €/ton) purification of CO2 to a purity grade sufficient for the above mentioned utilisation paths. A dedicated pilot plant (flue gas flow rate: 50 Nm3/h) will be developed, based on the knowledge-based selection of the best ionic-liquids composition and operating conditions.
Within a final TRL 6 integrated system demo campaign, the thereby derived CO2 will be utilised in parallel to:
-) promote the precipitation of nano-CaCO3 powders which act as strength enhancer and accelerator of the hydration rate.
-) synthesize through electrocatalytic and catalytic pathways formic acid, oxalic acid and glycine to be used as hardening acceleration promoters, grinding aids or ionic liquids additives, respectively.
Distinctive features of the RECODE approach are the high process intensification and scale-up-ability; the use of low-grade heat sources; the meaningful reduction of CO2 emissions (>20% accounting for direct and indirect means) and the good market potential of their products at a mass production scale.
The first two years of the project will be focused on the development of key functional materials and process units at TRL 4-5, the third year on the assembly of single-process lines certified at TRL 5-6, and the fourth year on the assembly and testing at a cement manufacturing site (TITAN) of the TRL 6 integrated CO2 process.
Champ scientifique
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectrical engineeringelectric energy
- natural sciencescomputer and information sciencesdatabases
- natural scienceschemical sciencesorganic chemistryorganic acids
- engineering and technologynanotechnologynano-materials
- social scienceseconomics and businesseconomicssustainable economy
Mots‑clés
Programme(s)
Régime de financement
RIA - Research and Innovation actionCoordinateur
16163 Genova
Italie
Voir sur la carte
Participants (15)
1014 BV Amsterdam
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
1014 BV Amsterdam
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
57001 Thermi Thessaloniki
Voir sur la carte
1040 Bruxelles / Brussel
Voir sur la carte
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
98122 Messina
Voir sur la carte
53123 Bonn
Voir sur la carte
76131 Karlsruhe
Voir sur la carte
10129 Torino
Voir sur la carte
9712CP Groningen
Voir sur la carte
10135 Torino
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
74076 HEILBRONN
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
10423 Vilnius
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
Participation terminée
12062 Cherasco
Voir sur la carte
111 43 Athina
Voir sur la carte
20097 MILANO
Voir sur la carte