CORDIS - Forschungsergebnisse der EU
CORDIS

Recycling carbon dioxide in the cement industry to produce added-value additives: a step towards a CO2 circular economy

Leistungen

Report on the Exploitation plan for the RECODE technologies, including techno-economic assessment and vision studies for alternative CO2 valorisation routes

The final explotation plan for the RECODE technologies is described along with the technoeconomic assessmentof the technologies by comparison with alternative competing CO2 valorisation routes

Training seminar 2

Development of training courses for students and professionals

Interim report on environmental assessment according to Life Cycle Analysis and REACH methods

 The interim LCA analysis of the RECODE process is described

Report on individual units models

The main models adopted for the modelling of each single process unit of interest are described

Final report on environmental assessment according to Life Cycle Analysis and REACH methods

The final LCA analysis of the RECODE process is described

Report on the assessment of the quality increase of cements enabled by the RECODE CO2-derived additives.

A complete set of characterisation tests are carried out to measure the improvements achieved by the use of the RECODE additives 

Training seminar 1

Development of training courses for students and professionals 

Report on the definition of regulatory framework after coming in contact with key energy players

This report lists the recommendation obtained by interviewing a number of stakeholder on the prenormative issues associated to the RECODE developments

Project Quality Plan (procedures regarding project quality monitor-ing and implementation)

Project procedures on consortium communication, documentation standards, detailed work plan, internal review processes and internal draft deliverables deadlines

Final report on dissemination activities

Report on project dissemination activities, media relations and outreach 

Dissemination plan

Awareness and dissemination plan outlining the target audiences, key messages, communication channels , implementation timing and role and responsibilities of partners

TRL 6 demo campaign accomplished and monitored

The entire demo campaign and the data monitored is reported in a detailed document and an outline of the major achievement is produced for the interested public

Report on final workshop and training event

Report on the final EU level workshop and training with presentation of the project achievements to the general public, policy makers, main stakeholders and students

Dissemination plan update

Update of the awareness and dissemination plan outlining the target audiences, key messages, communication channels , implementation timing and role and responsibilities of partners

Communication material

Project communication material including visual identity and basic project rules for communication

Production & distribution of an educational material on digital support

Educational material on the final event to be distributed both via digital support USB memory to training participants and available for download from the project web page

Project website

Publication of the RECODE project public website (with information on the projects, partners profiles and feeds from relevant social  networks) and internal repository for document sharing

Veröffentlichungen

Toxicological profile of calcium carbonate nanoparticles for industrial applications

Autoren: Marta d’Amora, Freddy Liendo, Fabio A. Deorsola, Samir Bensaid, Silvia Giordani
Veröffentlicht in: Colloids and Surfaces B: Biointerfaces, Ausgabe 190, 2020, Seite(n) 110947, ISSN 0927-7765
Herausgeber: Elsevier BV
DOI: 10.1016/j.colsurfb.2020.110947

Cyclic carbonates synthesised from CO2: Applications, challenges and recent research trends

Autoren: Paolo P. Pescarmona
Veröffentlicht in: Current Opinion in Green and Sustainable Chemistry, Ausgabe 24522236, 2021, Seite(n) 100457, ISSN 2452-2236
Herausgeber: Elsevier
DOI: 10.1016/j.cogsc.2021.100457

Nano CaCO3 particles in cement mortars towards developing a circular economy in the cement industry

Autoren: Isabella Cosentino, Freddy Liendo, Mara Arduino, Luciana Restuccia, Samir Bensaid, Fabio Deorsola, Giuseppe Andrea Ferro
Veröffentlicht in: Procedia Structural Integrity, Ausgabe 26, 2020, Seite(n) 155-165, ISSN 2452-3216
Herausgeber: Elsevier B.V
DOI: 10.1016/j.prostr.2020.06.019

Recycling CO2 from flue gas for CaCO3 nanoparticles production as cement filler: A Life Cycle Assessment

Autoren: Esperanza Batuecas; Freddy Liendo; Tonia Tommasi; Samir Bensaid; Fabio Alessandro Deorsola; Debora Fino
Veröffentlicht in: Journal of CO2 Utilization, Ausgabe 22129820, 2021, Seite(n) 101446, ISSN 2212-9820
Herausgeber: Elsevier BV
DOI: 10.1016/j.jcou.2021.101446

Efficient and reversible CO2 capture in bio-based ionic liquids solutions

Autoren: Latini,Giulio; Signorile,Matteo; Rosso,Francesca; Fin,Andrea; d'Amora,Marta; Giordani,Silvia; Pirri,Fabrizio; Crocellà,Valentina; Bordiga,Silvia; Bocchini,sergio
Veröffentlicht in: Journal of CO2 Utilization, Ausgabe 22129820, 2022, Seite(n) 101815, ISSN 2212-9820
Herausgeber: Elsevier BV
DOI: 10.1016/j.jcou.2021.101815

Effect of Thermal Stabilization on PAN-Derived Electrospun Carbon Nanofibers for CO2 Capture

Autoren: Elisa Maruccia, Stefania Ferrari, Mattia Bartoli, Lorenzo Lucherini, Giuseppina Meligrana, Candido F. Pirri, Guido Saracco, Claudio Gerbaldi
Veröffentlicht in: Polymers, 2021, ISSN 2073-4360
Herausgeber: MDPI
DOI: 10.3390/polym13234197

Nanocast nitrogen-containing ordered mesoporous carbons from glucosamine for selective CO2 capture

Autoren: Elisa Maruccia; Elisa Maruccia; Mirtha A.O. Lourenço; Tatiana Priamushko; Mattia Bartoli; Sergio Bocchini; Fabrizio Pirri; Fabrizio Pirri; Guido Saracco; Freddy Kleitz; Claudio Gerbaldi
Veröffentlicht in: Materials Today Sustainability, Ausgabe 4, 2022, ISSN 2589-2347
Herausgeber: Elsevier Ltd.
DOI: 10.1016/j.mtsust.2021.100089

Nucleation and growth kinetics of CaCO3 crystals in the presence of foreign monovalent ions

Autoren: Freddy Liendo; Mara Arduino; Fabio Alessandro Deorsola; Samir Bensaid
Veröffentlicht in: Journal of Crystal Growth, Ausgabe 00220248, 2022, Seite(n) 126406, ISSN 0022-0248
Herausgeber: Elsevier BV
DOI: 10.1016/j.jcrysgro.2021.126406

Factors controlling and influencing polymorphism, morphology and size of calcium carbonate synthesized through the carbonation route: A review

Autoren: Freddy Liendo; Mara Arduino; Fabio A. Deorsola; Samir Bensaid
Veröffentlicht in: POwder Technology, Ausgabe 00325910, 2022, Seite(n) 117050, ISSN 0032-5910
Herausgeber: Elsevier BV
DOI: 10.1016/j.powtec.2021.117050

Zeolite templated carbon from Beta replica as metal-free electrocatalyst for CO2 reduction

Autoren: Papanikolaou,G.; Chillè,D.; Abate,S.; Perathoner,S.; Centi,G.; Giorgianni,G.; Cozza,D.; Dalena,F.; Migliori,M.; Giordano,G.; Lanzafame,P.
Veröffentlicht in: Applied Materials Today, Ausgabe 23529407, 2022, Seite(n) 101383, ISSN 2352-9407
Herausgeber: Elsevier
DOI: 10.1016/j.apmt.2022.101383

Optimization of CaCO3 synthesis through the carbonation route in a packed bed reactor

Autoren: Freddy Liendo, Mara Arduino, Fabio A.D eorsola Samir Bensaid
Veröffentlicht in: Powder Technology, Ausgabe 00325910, 2021, Seite(n) 868-881, ISSN 0032-5910
Herausgeber: Elsevier BV
DOI: 10.1016/j.powtec.2020.09.036

An efficient method to prepare supported bismuth nanoparticles as highly selective electrocatalyst for the conversion of CO2 into formate

Autoren: Bart De Jong; Paolo Pescarmona; Nick Daems; Matteo Miola
Veröffentlicht in: Chemical Communications, Ausgabe 13597345, 2020, Seite(n) 14992, ISSN 1359-7345
Herausgeber: Royal Society of Chemistry
DOI: 10.1039/d0cc06818g

Chainlike Mesoporous SnO 2 as a Well-Performing Catalyst for Electrochemical CO 2 Reduction

Autoren: Katarzyna Bejtka, Juqin Zeng, Adriano Sacco, Micaela Castellino, Simelys Hernández, M. Amin Farkhondehfal, Umberto Savino, Simone Ansaloni, Candido F. Pirri, Angelica Chiodoni
Veröffentlicht in: ACS Applied Energy Materials, Ausgabe 2/5, 2019, Seite(n) 3081-3091, ISSN 2574-0962
Herausgeber: ACS APPLIED ENERGY MATERIALS
DOI: 10.1021/acsaem.8b02048

Evaluation of the mechanical properties of cements with fillers derived from the CO2 reduction of cement plants

Autoren: I. Cosentino, L. Restuccia, G.A. Ferro, F. Liendo, F. Deorsola, S. Bensaid
Veröffentlicht in: Procedia Structural Integrity, Ausgabe 18, 2019, Seite(n) 472-483, ISSN 2452-3216
Herausgeber: Elsevier B.V.
DOI: 10.1016/j.prostr.2019.08.189

Innovative Gas-Liquid Membrane Contactor Systems for Carbon Capture and Mineralization in Energy Intensive Industries.

Autoren: Akrivi Asimakopoulou; Dimitrios Koutsonikolas; Georgia Kastrinaki; George Skevis
Veröffentlicht in: Volume 11, Ausgabe 20770375, 2021, Seite(n) 271, ISSN 2077-0375
Herausgeber: Molecular Diversity Preservation International
DOI: 10.3390/membranes11040271

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor