Obiettivo Objectives and content Polyolefin based polymer films, especially polypropylene films have excellent mechanical, optical and barrier properties, well suited for many industrial applications like food packaging, electrical insulation, functional coatings, etc. However they require a surface treatment to increase their surface tension at a level allowing printing, laminating or metallizing... Currently, there is no satisfactory process to achieve this goal: typical corona discharge treatment in air provides partial results, not sufficient to reach high, consistent and permanent value of surface tension. As a result water based inks cannot or only rarely be used for printing, (oil based inks encounter pollution problems), for many applications chlorine containing films are still in use industrially and the most sophisticated polypropylene films are not printable at all, in spite of their excellent properties. Two members of the consortium have demonstrated the feasibility to produce and to maintain for months, polypropylene surface tension up to 60 dyn/cm by using corona discharge treatment under specially designed active atmosphere (patented process); (vs 42-44 dyn/cm ordinarily reached with air corona discharge treatment, falling down to 3840 dyn/cm in few days). This level of surface tension is completely satisfactory for water based inks printing or functional coatings. The purpose of the research project is to reached a level of knowledge allowing industrial applications by combining, on an international level, the skills between a gas manufacturer (atmosphere control), a corona discharge devices manufacturer (electrode design, integration into industrial processes), polymer film industrial transformers (application on industrial quality films) and three well chosen university laboratories for their experience into corona discharge, pulse current generators and polymer surface analysis. With the results already obtained concerning the feasibility of the process, its strategical interest and the combination of competences and industrial motivations joined together, we are quite confident in the industrial success. Campo scientifico natural scienceschemical sciencespolymer sciencesengineering and technologymaterials engineeringcoating and filmsnatural scienceschemical sciencesinorganic chemistryhalogensengineering and technologyother engineering and technologiesfood technologyfood packagingnatural sciencesearth and related environmental sciencesatmospheric sciencesmeteorologyatmospheric pressure Programma(i) FP4-BRITE/EURAM 3 - Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998 Argomento(i) 0201 - Materials engineering Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore L'AIR LIQUIDE SA Contributo UE Nessun dato Indirizzo Chemin de la Porte des Loges 1, Les Loges en Josa 78354 JOUY-EN-JOSAS Francia Mostra sulla mappa Costo totale Nessun dato Partecipanti (5) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto BIOPHY RESEARCH SA Francia Contributo UE Nessun dato Indirizzo Village d'Entreprises de Saint Henri, 6 rue Anne G 13016 MARSEILLE Mostra sulla mappa Costo totale Nessun dato Mactac Europe SA Belgio Contributo UE Nessun dato Indirizzo Boulevard Kennedy 7060 Soignies Mostra sulla mappa Costo totale Nessun dato Softal Electr. Erik Blumenfeld GmbH &Co Germania Contributo UE Nessun dato Indirizzo 1,König-Georg-Stieg 21107 Hamburg Mostra sulla mappa Costo totale Nessun dato Technische Universität Braunschweig Germania Contributo UE Nessun dato Indirizzo Westernwiese 38229 Salzgitter Mostra sulla mappa Costo totale Nessun dato UNIVERSITE PAUL SABATIER DE TOULOUSE III Francia Contributo UE Nessun dato Indirizzo Route de Narbonne 118 31062 Toulouse Mostra sulla mappa Costo totale Nessun dato