Objectif First of all new photopolimerizable watersoluble binders, have been synthesized. These resins, when cured under UV radiation, crosslink and turn from liquid into a solid film. Two chemical natures were developed. These options were considered the more promising ways to obtain adequate results. These are: Epoxidyc Nature, where 2 aqueous dispersions have been adjusted Polyrethane Nature, where several resins have been developed from emulsions entirely developed inside the project with adequate performances. Specific photoinitiators to enhance curing properties (conversion rates, cure speed) have been developed. The developed new family of photoinitiators complies with the curing requirements of the developed aqueous based resins with potential use in solvent based ones (a wide market with good economical expectatives). Experimental formulations based on the raw materials have appeared with application in the furniture coating field. Champ scientifique engineering and technologymaterials engineeringcoating and films Programme(s) FP3-CRAFT - Specific programme of research and technological development in the field of industrial and materials technologies - CRAFT -, 1990-1994 Thème(s) Data not available Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CIDEMCO TECHNOLOGICAL RESEARCH CENTRE Contribution de l’UE Aucune donnée Adresse S/N,Barrio Lasao, Area Anardi 5 20730 AZPEITIA Espagne Voir sur la carte Coût total Aucune donnée Participants (1) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire Synthesia Española SA Espagne Contribution de l’UE Aucune donnée Adresse 62,Conde Borrell 62 8015 Barcelona Voir sur la carte Coût total Aucune donnée