N2O abatement by catalytic treatment

Informazioni relative al progetto

ID dell’accordo di sovvenzione: ENV4950067

Progetto chiuso

Data di avvio 1 Febbraio 1996

Data di completamento 31 Gennaio 1999

Finanziato da

• Specific programme of research and technological development in the field of environment and climate, 1994-1998

Costo totale € 0,00

Contributo UE Nessun dato

Coordinato da

ENERGY RESEARCH CENTRE OF THE NETHERLANDS
Netherlands

Risultati finali

ADCAT Process, a catalytic process for decomposition of N2O by adsorption and subsequent heat treatment

Summary: The ADCAT Process is a method for selective removal of N2O from off-gases. The method is simple and cost-efficient. However, no suitable sorbens/catalyst was found during this research project. Description of Result: The principle of the ADCAT Process is to absorb N2O selectively from an off-gas at exhaust temperature. The adsorbed N2O is subsequently decomposed by heat treatment. The material used is both a sorbent ( in the first part of the process) and a catalyst (in the first part of the process) and a catalyst (in the second part of the process). The critical amount of N2O adsorption in order to make the process economically feasible was 5 wt% N2O adsorbed on the material. However, no material was found that accomplishes this goal. The best materials found in this project reached 2 wt% under favourable conditions. The partners involved in this part of the research project did not have the impression that a suitable material could be found within the time frame of the project