Objective
DEVELOPMENT OF AN ECONOMIC PROCESS FOR ABATMENT OF THE POLLUTION GENERATED BY THE EFFLUENTS OF THE PRODUCTION OF CHEMICAL-THERMAL-MECHANICAL PULPS, AND FOR THE RECOVERY OF FIBRES.
A. DEVELOPMENT AND EVALUATION OF AN ECONOMIC METHOD FOR THE TREATMENT OF POLLUTION GENERATED BY THE CTMP PROCESS, 4 STEPS WILL BE CONSIDERED:
- CLOSURE OF THE WATER SYSTEM AND STUDY OF ITS EQUILIBRIUM AND OF ITS INFLUENCE ON THE CONCENTRATION AND THE COMPOSITION OF THE WATERS USED FOR THE PROCESSING OF THE PULP;
- CLEANING OF THE WATER SYSTEMS BY ULTRAFILTRATION TECHNIQUES;
- TREATMENT OF THE EFFLUENT BY AEROBIC OR ANAEROBIC PROCESS;
- TECHNICO-ECONOMICAL ASSESSMENT OF THE TOTAL PROCESS IN VIEW OF ESTABLISHING ITS ECONOMICS.
B. DEPOLLUTION OF EFFLUENTS FROM PULP AND PAPER INDUSTRIES AND SELECTIVE RECOVERY OF FIBRES:
- TO STUDY, FIRST AT THE LAB SCALE THEN AT A PILOT PHASE A DEPOLLUTING DEVICE FOR PULP AND PAPER INDUSTRIES EFFLUENTS VIA: SEPARATION, RECOVERY AND VALORISATION OF THE ENCLOSED HIGH QUALITY FIBRES.
1. LABORATORY STUDY
1.1 CRITICAL REVIEW OF EXISTING DEVICES
1.2 REALISATION OF A LAB SCALE FILTRATING MODULE (5001/H)
- STUDY OF ITS PERFORMANCES ON DIFFERENT EFFLUENTS
- ADAPTATION OF A SELF-CLEANING DEVICE
- BALANCE SHEET OF THE PERFORMANCES.
2. PILOT PHASE
BUILDING OF A LARGE FLOW FILTRATING MODULE (30 M3/H) AND ASSEMBLING OF 3 MODULES (100 M3/H)
2.1 BUILDING OF THE PILOT PROTOTYPE (100 M3/H)
2.2 OPTIMISATION OF ITS EFFICIENCY.
Topic(s)
Data not availableCall for proposal
Data not availableFunding Scheme
CSC - Cost-sharing contractsCoordinator
38020 Grenoble
France