InductICEProject ID: 717175
Efficient, Modular and LigthWeight Electromagnetic Induction Based Ice Protection System
Total cost:EUR 252 577,50
EU contribution:EUR 252 577,50
Topic(s):JTI-CS2-2015-CFP02-AIR-02-11 - Ice protection technology based on electromagnetic induction integrated in representative leading edge structure
Call for proposal:H2020-CS2-CFP02-2015-01See other projects for this call
Funding scheme:CS2-RIA - Research and Innovation action
The general goal of the Project is to reach an efficient, modular and lightweight electromagnetic induction based ice protection system, which uniformly heats the wing leading edge surface.
One of the main objectives of the induction based ice-protection system is to achieve at least a 95% heating efficiency. In addition to efficiency, ice-protection system speed is essential in order to act on time and accurately without excessive on-board system consumption. Therefore, another one of the objectives of this project is to improve the speed, while providing a precise and targeted control of the generated heat facing the drawbacks of current on-board ice-protection systems. Finally, the weight of the whole solution must be minimized, essential in on-board aircraft systems. The final objective is to reach an ice-protection system with at least the same weight as current on-board ice-protection systems or on the contrary, the sum of its weight and its impact on on-board resources due to its high heating efficiency must be at least equal to current ice-protection solutions.
EU contribution: EUR 252 577,50
P JOSE MARIA ARIZMENDIARRIETA 2