Objetivo In order to improve the surface quality of steel products and to achieve high-energy savings in hot rolling plants, it is necessary to control the atmosphere in each zone inside the reheating furnaces reliably. The aim of the planned research project is to develop an improved control system for the air-fuel ratio in each zone using combustion gas analysis and model- supported process control. Real-time determination of physical characteristics is also needed to adjust the global air-fuel-ratio of furnaces. A feed-forward strategy for improved control shall be developed. Quasi-simultaneous combustion gas analysis at multiple locations inside the furnace shall be installed. Combustion gas analysis shall be introduced step-by-step to improve control of the air-fuel ratio. Programa(s) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Tema(s) D1 - Rolling: long products and reheating surfaces Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador Verein Deutscher Eisenhüttenleute eV Aportación de la UE Sin datos Dirección Sohnstraße 65 40237 Düsseldorf Alemania Ver en el mapa Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francia Aportación de la UE Sin datos Dirección Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX Ver en el mapa Coste total Sin datos