Skip to main content

Article Category


Article available in the folowing languages:

Gemini Mirror is First with Silver Lining

A silver coating newly applied to the 8-metre mirror of the Gemini South telescope is set to make it the most powerful infrared telescope on the Earth, allowing UK astronomers and their international partners to study in detail the formation of stars and planets.

A key measure of a telescope's performance in the infrared is its emissivity (how much heat it actually emits compared to the total amount it can theoretically emit) in the thermal or mid-infrared part of the spectrum. These emissions result in a background noise against which astronomical sources must be measured. Gemini has the lowest total thermal emissivity of any large astronomical telescope on the ground, with values under 4% prior to receiving its silver coating. 'This silver coating sets Gemini out as a world leader in thermal infrared astronomy that will allow new in-depth views of the formation of stars and planets and the inner workings of galaxies' says Dr Melvin Hoare from the University of Leeds who chairs the committee allocating UK time on Gemini and is currently using Gemini-South for star formation research. With this new coating, Gemini South's emissivity will drop to about 2%. At some wavelengths this has the same effect on sensitivity as increasing the diameter of the Gemini telescope from 8 to more than 11 meters! The result is a significant increase in the quality and amount of Gemini's infrared data, which allows detection of objects that would otherwise be lost in the noise generated by heat radiating from the telescope. It is common among other ground-based telescopes to have emissivity values in excess of 10%. The new coating-the first of its kind ever to line the surface of a very large astronomical mirror-is among the final steps in making Gemini the most powerful infrared telescope on our planet. "There is no question that, with this coating, the Gemini South telescope will be able to explore regions of star and planet formation, black holes at the centres of galaxies and other objects that have eluded other telescopes until now," said Charlie Telesco of the University of Florida who specializes in studying star- and planet-formation regions in the mid-infrared. To investors looking for the next sure thing, the silver coating on the Gemini South 8-meter telescope mirror might seem like an insider's secret tip-off to invest in this valuable metal for a huge profit. However, it turns out that this immense mirror required less than two ounces (50 grams) of silver, not nearly enough to register on the precious metals markets. The real return on Gemini's shiny investment is to provide unprecedented sensitivity from the ground when studying warm objects in space. Covering the Gemini mirror with silver utilizes a process developed over several years of testing and experimentation to produce a coating that meets the stringent requirements of astronomical research. Gemini's lead optical engineer, Maxime Boccas who oversaw the mirror-coating development said, "I guess you could say that after several years of hard work to identify and tune the best coating, we have found our silver lining!" Most astronomical mirrors are coated with aluminium using an evaporation process and require recoating every 12-18 months. Since the twin Gemini mirrors are optimized for viewing objects in both optical and infrared wavelengths, a different coating was specified. Planning and implementing the silver coating process for Gemini began with the design of twin 9-meter-wide coating chambers located at the observatory facilities in Chile and Hawaii. Each coating plant (originally built at the Royal Greenwich Observatory in the UK) incorporates devices called magnetrons to "sputter" a coating on the mirror. The sputtering process is necessary when applying multi-layered coatings on the Gemini mirrors in order to accurately control the thickness of the various materials deposited on the mirror's surface. A similar coating process is commonly used for architectural glass to reduce air-conditioning costs and produce an aesthetic reflection and colour to glass on buildings, but this is the first time it has been applied to a large astronomical telescope mirror. The coating is built up in a stack of four individual layers to assure that the silver adheres to the glass base of the mirror and is protected from the environmental elements and chemical reactions. As anyone with silverware knows, tarnish on silver reduces the reflection of light. The degradation of an unprotected coating on a telescope mirror would have a profound impact on its performance. Tests done at Gemini with dozens of small mirror samples over the past few years show that the silvered coating applied to the Gemini mirror should remain highly reflective and usable for at least a year between recoatings. ,In addition to the large primary mirror, the telescope's 1-meter secondary mirror and a third mirror that directs light into scientific instruments were also coated using the same protected silver coatings. The combination of these three mirror coatings as well as other design considerations are all responsible for the dramatic increase in Gemini's sensitivity to thermal infrared radiation.,The recoating procedure was successfully performed on May 31, and the newly coated Gemini South mirror has been re-installed and calibrated in the telescope. Engineers are currently testing the systems before returning the telescope to full operations. The Gemini North mirror on Mauna Kea will undergo the same coating process before the end of this year.,NTSC/PAL and HDTV time-lapse footage and images available at:


United Kingdom