Skip to main content

Advanced concepts for trailing edge morphing wings - Design and manufacturing of test rig and test samples - Test execution

Objective

The SMyTE project aims to develop state-of-the-art SMA actuator specimen(s), undergoing controlled deformation and to perform tests on a suitably designed and assembled test rig with its related interface components to assure the characterisation of SACM and DESA demonstrators and the validation of numerical schemes used during design phase. At a later stage, it is further aimed to be applied on the trailing edge of an adaptive/morphing wing. For this reason several aspects such as fail-safe, test execution under different type of static and dynamic loads are considered reflecting in fact the future applicability of the current project.
The proposal is building on background knowledge in design and characterisation of SMA actuators and mechanisms as well as in experience in prototype static and dynamic characterisation tests.

Call for proposal

SP1-JTI-CS-2011-01
See other projects for this call

Coordinator

INASCO HELLAS ETAIREIA EFARMOSMENON AERODIASTIMIKON EPISTIMON EE
Address
Napoleontos Zerva 18
16675 Glyfada Athina
Greece

See on map

Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Administrative Contact
Dimitrios Karagiannis (Mr.)
EU contribution
€ 60 926

Participants (2)

AEROTRON RESEARCH ASTIKI ETAIRIA
Greece
EU contribution
€ 59 850
Address
Lykourgou 5-7
17563 Paleo Faliro

See on map

Activity type
Research Organisations
Administrative Contact
Theodoros Spathopoulos (Dr.)
PANEPISTIMIO PATRON
Greece
EU contribution
€ 36 939
Address
University Campus Rio Patras
265 04 Rio Patras

See on map

Activity type
Higher or Secondary Education Establishments
Administrative Contact
Dimitrios Saravanos (Prof.)