Deliverables
Handbook of Decarbonisation Innovation in carbon-intensive sectors (Task 6.6)
Minutes of the AB second meeting
Report on implications for modelling decarbonisation (Task 6.5)
Summary of decarbonisation case-studies (Task 3.3)
Workshop report on decarbonisation pathways in the plastics industry (Task 4.3)
A text about REINVENT results targeted to media, industry and policy makers
An analysis of patterns and trends (task 2.4) and of future pathways and possibilities for cross-fertilization across sectors (task 2.5)
Assessment of environmental, economic and social impacts of decarbonisation innovations (Task 3.5)
Report comparing investment, production and consumption innovations (Task 2.1, 2.2)
Review report describing the existing information on potential future transitions in the different sectors in Europe and forms an input to task 4.2 – but also to other tasks requiring early information on the decarbonisation challenge in the different sectors.
Report comparing investment, production and consumption innovations (Task 2.1, 2.2)
Project briefing note: stakeholder perspectives on the core analytical challenges for REINVENT key resource-based economic sectors, understood as value chains (Task 1.2)
Development of an edited book based on the findings from the project (Task 1.4)
Project report: innovation biographies for 5-10 innovations with significant impact (Task 2.3)
Policy brief on “Synergies and trade-offs at different levels of governance in the four sectors” (Task 5.4)
Report on achieving momentum for decarbonisation (Task 6.2)
Workshop report on decarbonisation and investment (Task 4.3)
Updated version of the Dissemination and Communications Strategy (DACS) (Task 7.1)
Protocol for analysis and methodological toolbox
Report on new co-designed pathways based on workshops etc. (Task 4.3)
Report on scaling decarbonisation and managing transitions in terms of agency, timing and accountability (Task 6.1)
Motivation for the selection of case studies (Task 3.2 report)
Advisory board and terms of reference
A press release about the start of REINVENT
Internal synthesis report on an evidence based scheme of non-technical drivers of innovations and on potential influencing factors for future low carbon innovations as well as preliminary implications for (innovation) policy (for use in WP4 workshops). Task 3.4
Workshop report on decarbonisation and consumption (Task 4.3)
Workshop report on decarbonisation pathways in meat and dairy (Task 4.3)
Determining the critical drivers, dynamic and implications of decarbonisation through stakeholder dialogue (Task 1.2)
Assessment of the cumulative impact of innovations/initiatives of sectoral decarbonisation scenarios (Task 4.4)
Policy briefing-note on approaches to transition policy evaluation (Task 6.4)
Report on mitigation scenarios across scale describing in detail the mitigation challenge in each of the sectors under different scenarios, within the context of the decarbonisation objectives set-out in COP21 (Task 4.2)
Report comparing investment, production and consumption innovations (Task 2.1, 2.2)
A text about REINVENT targeted to media, industry and policy makers
Minutes of the AB first meeting
Risk management plan
Project report: analytical framework and guidance for its application in WP2-6 (Task 1.3)
Report on “Modelling the integrated economic, environmental and social equity impacts of decarbonisation in four selected sectors at the EU in a global context” (Task 5.3)
A first version of the Dissemination and Communications Strategy (DACS) (Task 7.1)
Report on synthesis workshop (Task 3.3)
REINVENT will together with European Environment Agency (Copenhagen) and European Evaluators Network host a joint workshop on new approaches to transition policy evaluations.
Workshop report on decarbonisation pathways in the paper industry (Task 4.3)
Report on interim workshop on case-studies (Task 3.3)
Report on “Policy and institutional coherence between the EU climate regime and the global sustainable development agenda” (Task 5.2)
Report on “Decarbonisation and its effects on growth, wages and competitiveness in four selected sectors” (Task 5.1)
Report comparing investment, production and consumption innovations (Task 2.1, 2.2)
Workshop report on decarbonisation pathways in the steel industry (Task 4.3)
REINVENT press release results
Project report: appraisal of the current state-of-the-art on the politics, geographies and materialities of decarbonisation. (Task 1.1)
Report comparing investment, production and consumption innovations (Task 2.1, 2.2)
Synthesis report on the consequences of the analytical insights produced by REINVENT for achieving transformative decarbonisation (Task 1.3)
Work Plan
Decarbonisation Pathways Portal that provides access to knowledge and tools for managing low carbon transitions
Database of innovations for decarbonisation throughout the value chain in the sectors (Task 2.2)
PPT presentation and template for REINVENT
Poster and roll-up about REINVENT
Launch the official website
Report on the final conference
Data Management Plan
Searching for OpenAIRE data...
Publications
Author(s): Duncan Kushnir, Teis Hansen, Valentin Vogl and MaxÅhman
Published in: Journal of Cleaner Production, 242(1), 2020, ISSN 0959-6526
Publisher: Elsevier BV
DOI: 10.1016/j.jclepro.2019.118185
Author(s): Tobias D. Nielsen, Jacob Hasselbalch, Karl Holmberg, Johannes Stripple
Published in: WIREs Energy and Environment, 9/1, 2019, ISSN 2041-8396
Publisher: John Wiley and Sons Ltd
DOI: 10.1002/wene.360
Author(s): Ekaterina Chertkovskaya, Karl Holmberg, Moa Petersén, Johannes Stripple, Sara Ullström
Published in: Global Sustainability, 3, 2020, ISSN 2059-4798
Publisher: Cambridge University Press
DOI: 10.1017/sus.2020.10
Author(s): Mariësse A.E. van Sluisveld, Mathijs J.H.M. Harmsen, Detlef P. van Vuuren, Valentina Bosetti, Charlie Wilson, Bob van der Zwaan
Published in: Global Environmental Change, 50, 2018, Page(s) 201-211, ISSN 0959-3780
Publisher: Elsevier BV
DOI: 10.1016/j.gloenvcha.2018.03.009
Author(s): Valentin Vogl, Max Åhman, Lars J. Nilsson
Published in: Journal of Cleaner Production, 203, 2018, Page(s) 736-745, ISSN 0959-6526
Publisher: Elsevier BV
DOI: 10.1016/j.jclepro.2018.08.279
Author(s): Chris Bataille, Max Åhman, Karsten Neuhoff, Lars J. Nilsson, Manfred Fischedick, Stefan Lechtenböhmer, Baltazar Solano-Rodriquez, Amandine Denis-Ryan, Seton Stiebert, Henri Waisman, Oliver Sartor, Shahrzad Rahbar
Published in: Journal of Cleaner Production, 187, 2018, Page(s) 960-973, ISSN 0959-6526
Publisher: Elsevier BV
DOI: 10.1016/j.jclepro.2018.03.107
Author(s): Gavin Bridge, Harriet Bulkeley, Paul Langley, Bregje van Veelen
Published in: Progress in Human Geography, 2019, Page(s) 030913251985626, ISSN 0309-1325
Publisher: SAGE Publications
DOI: 10.1177/0309132519856260
Author(s): Enrica De Cian, Shouro Dasgupta, Andries F. Hof, Mariësse A.E. van Sluisveld, Jonathan Köhler, Benjamin Pfluger, Detlef P. van Vuuren
Published in: Technological Forecasting and Social Change, 2018, ISSN 0040-1625
Publisher: Elsevier BV
DOI: 10.1016/j.techfore.2018.10.004
Author(s): Tziva, M., S.O. Negro, A. Kalfagianni, M.P. Hekkert
Published in: Environmental Innovation and Societal Transitions, 2020, ISSN 2210-4224
Publisher: Elsevier BV
DOI: 10.1016/j.eist.2019.09.004
Author(s): Gunnar Luderer, Michaja Pehl, Anders Arvesen, Thomas Gibon, Benjamin L. Bodirsky, Harmen Sytze de Boer, Oliver Fricko, Mohamad Hejazi, Florian Humpenöder, Gokul Iyer, Silvana Mima, Ioanna Mouratiadou, Robert C. Pietzcker, Alexander Popp, Maarten van den Berg, Detlef van Vuuren, Edgar G. Hertwich
Published in: Nature Communications, 10/1, 2019, ISSN 2041-1723
Publisher: Nature Publishing Group
DOI: 10.1038/s41467-019-13067-8
Author(s): Nilsson L.J., Åhman M., Vogl V., and Lechtenböhmer S.
Published in: Proceedings from LCS-RNet 2017, 2017
Publisher: Wuppertal Institute
DOI: 10.13140/RG.2.2.17199.43688
Author(s): Bulkeley, H. and B. van Veelen
Published in: 2020
Publisher: Royal Geographical Society