Skip to main content

Next Generation PEM Electrolyser under New Extremes

Deliverables

Public Report on catalyst development for electrolysis applications

Publishable extract of D4.2 - manufacturing of catalysts meeting the specifications and provisions for large area MEAs and stack

Harmonised test protocols for assessing system components, stack and balance of plant in a wide range of operating temperature and pressures

Implementation of the harmonised characterisation protocols developed by JRC with the contribution of some partners of this consortium for testing MEAs, stack & system and extension of operating conditions to address the specific project targets (CNR). The definition of these protocols will serve as an input for both the harmonization efforts in various FCH JU projects and to provide input to subsequent specification work as well as to enable planning of the test activities in WP3, WP4, WP5 and WP6.

Supply of 1st generation reinforced recast and extruded Aquivion membrane, and ionomer dispersions for high temperature and high pressure operation

Short-side-chain PFSA Aquivion® membranes will be developed in this task by Solvay with the aim to improve conductivity, decrease ohmic drop during operation at 4-8 A cm-2 and enhance mechanical and thermal resistance for achieving high operating pressures (up to 100 bar) and temperatures (up to 140 °C). Developments will be focused on decreasing ohmic resistance (< 25 mOhm cm2 or ohmic loss <100 mV at 4 A cm-2).

Public Report on stack characterization

Publishable extract of D55 Validation of PEM electrolysis stacks durability in endurance tests and dynamic operating conditions

Design of a project visual identity set and project templates (presentations, logo)

Design of a project visual identity set and project templates (presentations, logo)

Data-set on catalytic activity, electrochemical performance and stability of enhanced catalysts

Data-set on catalytic activity, electrochemical performance and stability of enhanced catalysts

Public Report on MEA development and characterisation

Publishable extract of D5.2 - Optimised MEAs supply for stack testing

Project website and database for dissemination (stakeholdesr, interest groups, contact details)

Project website and database for dissemination (stakeholdesr, interest groups, contact details)

Dissemination Plan published

Final plan for dissemination of project completed including dissemination activities attended throughout the project and planned activities after the project

Public report on membrane development for electrolysis applications

Publishable extract of Deliverables D3.2 and 3.3

Assessment of membrane electrode assemblies for high temperature and high pressure operation

Assessment of membrane electrode assemblies for high temperature and high pressure operation

Searching for OpenAIRE data...

Publications

Durability of a recombination catalyst-based membrane-electrode assembly for electrolysis operation at high current density

Author(s): Fabiola Pantò, Stefania Siracusano, Nicola Briguglio, Antonino Salvatore Aricò
Published in: Applied Energy, 279, 2020, Page(s) 115809, ISSN 0306-2619
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.apenergy.2020.115809

Reinforced short-side-chain Aquivion® membrane for proton exchange membrane water electrolysis

Author(s): S. Siracusano, F. Pantò, S. Tonella, C. Oldani, A. S.Aricò
Published in: International Journal of Hydrogen Energy, Volume 47, Issue 35, 2022, Page(s) 15557-15570, ISSN 0360-3199
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.ijhydene.2022.03.061

Flammability reduction in a pressurised water electrolyser based on a thin polymer electrolyte membrane through a Pt-alloy catalytic approach

Author(s): Nicola Briguglio, Stefania Siracusano, Giuseppe Bonura, David Sebastián, Antonino S. Aricò
Published in: Applied Catalysis B: Environmental, 246, 2019, Page(s) 254-265, ISSN 0926-3373
Publisher: Elsevier BV
DOI: 10.1016/j.apcatb.2018.12.079

Chemically stabilised extruded and recast short side chain Aquivion® proton exchange membranes for high current density operation in water electrolysis

Author(s): Stefania Siracusano, Claudio Oldani, Maria Assunta Navarra, Stefano Tonella, Lucia Mazzapioda, Nicola Briguglio, Antonino S. Aricò
Published in: Journal of Membrane Science, 578, 2019, Page(s) 136-148, ISSN 0376-7388
Publisher: Elsevier BV
DOI: 10.1016/j.memsci.2019.02.021

Analysis of performance degradation during steady-state and load-thermal cycles of proton exchange membrane water electrolysis cells

Author(s): Stefania Siracusano, Stefano Trocino, Nicola Briguglio, Fabiola Pantò, Antonino S. Aricò
Published in: Journal of Power Sources, 468, 2020, Page(s) 228390, ISSN 0378-7753
Publisher: Elsevier BV
DOI: 10.1016/j.jpowsour.2020.228390

Enhanced performance of a PtCo recombination catalyst for reducing the H2 concentration in the O2 stream of a PEM electrolysis cell in the presence of a thin membrane and a high differential pressure

Author(s): N. Briguglio, F. Pantò, S. Siracusano, A.S. Aricò
Published in: Electrochimica Acta, 344, 2020, Page(s) 136153, ISSN 0013-4686
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2020.136153