European Commission logo
English English
CORDIS - EU research results
CORDIS

VIZTA sounds for Vision, Identification, with Z-sensing Technologies and key Applications.

Project description

Innovative image sensors to drive 3D imaging forward

3D imaging has become important in industrial and consumer applications, allowing more accurate inspection of components at manufacturing sites and greater image depth for media, respectively. The EU-funded VIZTA project is developing advanced new optical sensors and laser sources for short- and long-range 3D imaging. Innovations include, amongst others, advanced time-of-flight solutions leveraging single-photon avalanche diodes, cost-effective near-infrared and RGB on-chip filters, complex RGB pixels for multimodal imaging, advanced Optical Phase Array and laser sources for LiDAR systems. Bringing together industry and academia, VIZTA will develop six demonstrators that will find applications in diverse fields including the automotive, security, smart buildings, mobile robotics for smart cities, and industry 4.0.

Objective

VIZTA project, coordinated by ST Micrelectronics, aims at developing innovative technologies in the field of optical sensors and laser sources for short to long-range 3D-imaging and to demonstrate their value in several key applications including automotive, security, smart buildings, mobile robotics for smart cities, and industry4.0. The key differentiating 12-inch Silicon sensing technologies developed during VIZTA are:
• Innovative SPAD and lock-in pixel for Time of Flight architecture sensors
• Unprecedent and cost-effective NIR and RGB-Z filters on-chip solutions
• complex RGB+Z pixel architectures for multimodal 2D/3D imaging
For short-range sensors : advanced VCSEL sources including wafer-level GaAs optics and associated high speed driver
These developed differentiating technologies allows the development and validation of innovative 3D imaging sensors products with the following highly integrated prototypes demonstrators:
• High resolution (>77 000 points) time-of-flight ranging sensor module with integrated VCSEL, drivers, filters and optics.
• Very High resolution (VGA min) depth camera sensor with integrated filters and optics
For Medium and Long range sensing, VIZTA also adresses new LiDAR systems with dedicated sources, optics and sensors
Technology developments of sensors and emitters are carried out by leading semiconductor product suppliers (ST Microelectronics, Philips, III-V Lab) with the support of equipment suppliers (Amat, Semilab) and CEA Leti RTO.
VIZTA project also include the developement of 6 demonstrators for key applications including automotive, security, smart buildings, mobile robotics for smart cities, and industry4.0 with a good mix of industrial and academic partners (Ibeo, Veoneer, Ficosa, Beamagine, IEE, DFKI, UPC, Idemia, CEA-List, ISD, BCB, IDE, Eurecat). VIZTA consortium brings together 23 partners from 9 countries in Europe: France, Germany, Spain, Greece, Luxembourg, Latvia, Sweden, Hungary, and United Kingdom.

Coordinator

STMICROELECTRONICS CROLLES 2 SAS
Net EU contribution
€ 5 482 013,25
Address
RUE JEAN MONNET 850
38920 Crolles
France

See on map

Region
Auvergne-Rhône-Alpes Rhône-Alpes Isère
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Total cost
€ 29 283 259,81

Participants (27)