Skip to main content

Crystalline Silicon PV: Low-cost, highly efficient and reliable modules (CRYSTAL CLEAR)

Article Category

Article available in the folowing languages:

Significant cost savings for solar energy technology

Harnessing solar energy to produce electricity represents a clean and renewable alternative to the use of fossil fuels but has not been fully exploited to date largely due to cost. EU-funded researchers developed new technology for the solar module that promises to dramatically improve cost effectiveness.


European researchers set out to dramatically reduce costs of the central solar system component, the solar module, while increasing efficiency, enhancing sustainability and broadening the potential market. In particular, the ‘Crystalline silicon PV: Low-cost, highly efficient and reliable modules’ (Crystal CLEAR) project was designed to develop technology allowing a reduction in the use of expensive materials while simultaneously introducing more cost-effective ones, an increase in electricity output of the solar modules and automated low-cost mass production processes – all with a focus on enhanced sustainability. Crystalline silicon photovoltaic (PV) cells were the first type of PV cells to be widely commercialised, some of which are made from an ingot of melted and recrystallised silicon saw-cut into wafers. However, silicon is in short supply and cost is rapidly increasing. A strong competitor to the silicon wafer technology is production of thin film PV modules by depositing PV material on a ceramic substrate. Crystal CLEAR focused on producing crystalline silicon thin-film solar cells comparable with state-of-the-art wafer technologies (so-called ‘wafer equivalent’) at significantly lower cost and using an alternative feedstock, currently the silicon from which PV cells are made. Investigators developed the epitaxial wafer equivalent (EpiWE) and appropriate processing techniques to produce a full-size PV demonstrator module, the Superslice I. Life-Cycle Assessment (LCA) revealed a decrease in energy payback time of 1.8 to 2.4 years for Central Europe as well as a reduction in environmental impact of at least 18–24 %. The Crystal CLEAR project has the potential to enable Europe to regain PV market share lost to Japan in recent years, boosting the European economy with job creation and revenues. Reducing costs and increasing efficiency while improving the environmental profile of solar PV cells should strengthen the position of solar energy as an alternative to conventional electricity and enhance its more widespread application.

Discover other articles in the same domain of application