Objective
This project is aiming at the scaling-up of one of the most promising concepts for CO2 capture from coal power plants: postcombustion carbonate looping systems. This project focuses on the experimental pilot testing and scaling up of the process at scales in the 1 MW range. The 1 Mw carbonate looping pilot will be built in the Hunosa 50 Mwe CFB coal power plant of “La Pereda”, using a side stream of flue gases of the commercial plant. A parallel research program will be developed along the activities to design, build and test at the pilot, including research activities at lab-scale and fundamental knowledge on sorbent properties. This program will be developed by the scientific leaders in the development of this technology worldwide, and will help with the design of the pilot to a better understand of the results. The scope of this project is the necessary step towards a possible pre-industrial demo plant (10s of Mw scale) .This is clearly in line with the expected level of development for this technology outlined in the European Technology Platform for Zero Emission Fossil Fuel Power Plants and also with wider targets to accelerate the development of breaktrough technologies for CO2 capture under the EU Strategic Enegy Technology Plan.
Fields of science
Call for proposal
FP7-ENERGY-2009-1
See other projects for this call
Funding Scheme
CP - Collaborative project (generic)
Coordinator
41004 Sevilla
Spain
See on map
Participants (7)
33005 Oviedo
See on map
53850 Lappeenranta
See on map
SW7 2AZ London
See on map
28006 Madrid
See on map
28232 Las Rozas De Madrid
See on map
70174 Stuttgart
See on map
K1N 6N5 Ottawa
See on map