Resultado final
Progress report period 1
Progress report on period 1 (M1-M18)
Report and prototype software for multivariate adaptive spline technologyReport on shape deformation techniques based on volumet-ric approaches
Report on shape deformation techniques based on volumet-ric approaches (dissemination level: PU/RE)
Report and prototype for structural mechanics solverReport and prototype software for geometry-aware block structuring and volume parameterization
Project presentation of objective and work plan
Report on project presentation of objective and work plan
Volumetric parameterization of the flow passage using adaptive spline technologies and the proposed template mappingReport and prototype for incompressible flow solver
Report and prototype for visualization environment
Report and prototype for compressible flow solver
Final report
Project website online
Publicaciones
Autores:
L. Chen, B. Simeon, S. Klinkel
Publicado en:
Computer Methods in Applied Mechanics and Engineering, Edición 305, 2016, Página(s) 777-805, ISSN 0045-7825
Editor:
Elsevier BV
DOI:
10.1016/j.cma.2016.03.019
Autores:
Nora Engleitner, Bert Jüttler
Publicado en:
Computer-Aided Design, Edición 90, 2017, Página(s) 168-179, ISSN 0010-4485
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.cad.2017.05.021
Autores:
Anmol Goyal, Bernd Simeon
Publicado en:
Mathematics and Computers in Simulation, Edición 136, 2017, Página(s) 78-103, ISSN 0378-4754
Editor:
Elsevier BV
DOI:
10.1016/j.matcom.2016.12.001
Autores:
Jochen Hinz, Matthias Möller, C. Vuik
Publicado en:
Computer Aided Geometric Design, 2018, ISSN 0167-8396
Editor:
Elsevier BV
Autores:
Michael Haberleitner, Bert Jüttler
Publicado en:
Computer-Aided Design, Edición 90, 2017, Página(s) 135-145, ISSN 0010-4485
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.cad.2017.05.007
Autores:
Carlotta Giannelli, Bert Jüttler, Stefan K. Kleiss, Angelos Mantzaflaris, Bernd Simeon, Jaka Špeh
Publicado en:
Computer Methods in Applied Mechanics and Engineering, Edición 299, 2016, Página(s) 337-365, ISSN 0045-7825
Editor:
Elsevier BV
DOI:
10.1016/j.cma.2015.11.002
Autores:
Florian Buchegger, Bert Jüttler
Publicado en:
Computer-Aided Design, Edición Vol 81, January 2017, 2017, Página(s) 2-12, ISSN 0010-4485
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.cad.2016.05.019
Autores:
Matthias Möller and Andrzej Jaeschke
Publicado en:
Proceedings of the 19th International Conference on Finite Elements in Flow Problems - FEF 2017, 2018
Editor:
Springer
Autores:
Jochen Hinz, Matthias Möller, C. Vuik
Publicado en:
2018
Editor:
European Community on Computational Methods in Applied Sciences (ECCOMAS)
Autores:
Simon Törnros, Olof Klerebrant Klasson
Publicado en:
21st Numerical Towing Tank Symposium (NuTTS'18), 2018
Editor:
N/A
Autores:
Matthias Utri, Andreas Brümmer
Publicado en:
IOP Conference Series: Materials Science and Engineering 232, 2017, 2017
Editor:
IOP
Autores:
Matthias Möller and Jochen Hinz
Publicado en:
Proceedings of the 10th International Conference on Screw Machines (ICSM 2018), 2018
Editor:
IOP Science
Autores:
Jochen Hinz, Matthias Möller, C. Vuik
Publicado en:
2018
Editor:
IOPscience
Autores:
Alexander Shamanskiy and Bernd Simeon
Publicado en:
IOP Conference Series: Materials Science and Engineering, 2018, ISSN 1757-8981
Editor:
IOP Publishing
Autores:
Matthias Utri, Simon Höckenkamp, Andreas Brümmer
Publicado en:
IOP Conference Series, not yet available (International Conference on Screw Machines 2018), 2018
Editor:
IOP
Autores:
Matthias Utri, Andreas Brümmer
Publicado en:
24th International compressor engineering conference at Purdue, 2018
Editor:
Ray W. Herrick Laboratories
Autores:
Matthias Utri, Andreas Brümmer, Jan Hauser
Publicado en:
IOP Conference Series, not yet available (International Conference on Screw Machines 2018), 2018
Editor:
IOP
Autores:
Dominik Mokriš, Jona Mangold, Martin Schifko
Publicado en:
SAE Technical Paper Series, Edición 2018-01-1386, 2018
Editor:
SAE International
DOI:
10.4271/2018-01-1386
Autores:
Andrzej Jaeschke and Matthias Möller
Publicado en:
Proceedings of the 19th International Conference on Finite Elements in Flow Problems - FEF 2017, 2018
Editor:
Springer
Autores:
Matthias Möller and Andrzej Jaeschke
Publicado en:
2018
Editor:
European Community on Computational Methods in Applied Sciences (ECCOMAS)
Autores:
Foeth, E.J., Deij-van Rijswijk. M.
Publicado en:
2019 International Symposium on Marine Propulsors, 2019
Editor:
Insean
Autores:
Martin Schifko (ESS)
Publicado en:
NAFEMS European Conference: Computational Fluid Dynamics (CFD) – Beyond the Solve, Edición December 2-3, 2015, 2015, Página(s) 5
Editor:
NAFEMS
Autores:
Martin Schifko (ESS)
Publicado en:
SAE 2016 World Congress and Exhibition, Edición 2016-04-05, 2015, Página(s) 7
Editor:
SAE
Autores:
Bernhard Kornberger
Publicado en:
"DFO Tagung ""Einsparmoglichkeiten durch Simulation des Lackierprozess""", Edición 2016-09-14, 2015
Editor:
DFO
Autores:
Svajunas Sajavicius, Bert Juettler, Jaka Speh
Publicado en:
9th International Conference on Mathematical Methods for Curves and Surfaces, Edición Biannually, 2016, Página(s) 76
Editor:
University of Oslo
Autores:
Matthias Utri, Andreas Brümmer
Publicado en:
23rd International Compressor Engineering Conference at Purdue, Edición 23, every two years, 2016
Editor:
Ray W. Herrick Laboratories
Autores:
Anna Pia Lohfink
Publicado en:
Mafelap conference, 2016
Editor:
Brunel University London
Autores:
Matthias Möller, Andrzej Jaeschke
Publicado en:
2015
Editor:
IMA Conference on Numerical Methods for Simulation
Autores:
Matthias Möller
Publicado en:
2016
Editor:
MAFELAP 2016 – Brunel University London
Autores:
Matthias Möller
Publicado en:
2016
Editor:
USACM Conference on Isogeometric Analysis and Meshfree Methods 2016
Autores:
Matthias Möller
Publicado en:
2016
Editor:
ESCO 2016 Conference
Autores:
Matthias Möller
Publicado en:
2016
Editor:
Deltares
Autores:
Matthias Möller, Andrzej Jaeschke
Publicado en:
2017
Editor:
IACM FEF Conference 2017
Autores:
Svajunas Sajavicius
Publicado en:
Conference of Curves and Surfaces, 2016
Editor:
Conference of Curves and Surfaces
Autores:
Matthias Möller
Publicado en:
2016
Editor:
Scientific Computing Seminar at TU Kaiserslautern
Autores:
M. Brandner, H. Horníková, J. Šourek
Publicado en:
2016
Editor:
PANM 18 (Programy a algoritmy numerické matematiky 18)
Autores:
J. Šourek, H. Horníková
Publicado en:
2016
Editor:
• Seminar on Differential Equations 2016
Autores:
Svajūnas Sajavičius, Bert Jüttler, Jaka Špeh
Publicado en:
Springer INdAM Series, 2019
Editor:
Springer International Publoshing AG
Autores:
Jaka Speh
Publicado en:
2016
Editor:
Johannes Kepler Universität Linz
Autores:
J. Šourek
Publicado en:
2016
Editor:
PANM 18 (Programy a algoritmy numerické matematiky 18)
Autores:
H. Horníková
Publicado en:
2016
Editor:
PANM 18 (Programy a algoritmy numerické matematiky 18)
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles