Objectif In this joint research project, INSA, IRSID, BAM and BFI propose to improve and compare the methods of real-time radiography and automatic evaluation of X-ray photographs. The advantage of such systems is the objective and reproducible location of defects and their classification without the limitations of human judgement in interpreting X-ray photographs. The products to be inspected would be welds of thicknesses up to 60 mm and eventually hot and cold rolled plate (thickness range 0.2 mm to 3 mm) from various sources. The work, which will be coordinated among the four applicants, will be divided up as follows: - INSA will implement and test software with processing on an existing system; - IRSID will mainly carry out comparative tests with other means of non-destructive testing; - BAM will develop evaluation of the characteristic parameters of imaging devices; - BFI will work out the image processing algorithms. Programme(s) ECSC-STEELRES 7C - Medium-term guidelines (ECSC) "technical steel research", 1986-1990 Thème(s) E1 - NDT technology and measurement Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur INSTITUT NATIONAL DES SCIENCES APPLIQUEES Contribution de l’UE Aucune donnée Adresse Avenue Albert Einstein 20 69621 VILLEURBANNE CEDEX France Voir sur la carte Coût total Aucune donnée Participants (1) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE France Contribution de l’UE Aucune donnée Adresse 34, rue de la Croix de Fer 78105 PARIS LA DEFENSE Voir sur la carte Coût total Aucune donnée