Cel In this joint research project, INSA, IRSID, BAM and BFI propose to improve and compare the methods of real-time radiography and automatic evaluation of X-ray photographs. The advantage of such systems is the objective and reproducible location of defects and their classification without the limitations of human judgement in interpreting X-ray photographs. The products to be inspected would be welds of thicknesses up to 60 mm and eventually hot and cold rolled plate (thickness range 0.2 mm to 3 mm) from various sources. The work, which will be coordinated among the four applicants, will be divided up as follows: - INSA will implement and test software with processing on an existing system; - IRSID will mainly carry out comparative tests with other means of non-destructive testing; - BAM will develop evaluation of the characteristic parameters of imaging devices; - BFI will work out the image processing algorithms. Program(-y) ECSC-STEELRES 7C - Medium-term guidelines (ECSC) "technical steel research", 1986-1990 Temat(-y) E1 - NDT technology and measurement Zaproszenie do składania wniosków Data not available System finansowania CSC - Cost-sharing contracts Koordynator INSTITUT NATIONAL DES SCIENCES APPLIQUEES Wkład UE Brak danych Adres Avenue Albert Einstein 20 69621 VILLEURBANNE CEDEX Francja Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (1) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francja Wkład UE Brak danych Adres 34, rue de la Croix de Fer 78105 PARIS LA DEFENSE Zobacz na mapie Koszt całkowity Brak danych