Objectif The present proposal is phase II of a currently running Pilot and Demonstration project. It is focused on the application of ultra fast cooling to thin strip. The work programme of the project includes the design, building and testing in the normal operating conditions of the hot strip mill, of a novel short cooling equipment, placed immediately behind the last rolling stand. It allows to cool the strip in a very fast and controllable way. One of the main objectives is to first design, build and test a pinch roll, placed at the exit of a cooling equipment in order to avoid the flying of the thinner strips under the influence of the cooling water pressure. This will allow to apply the cooling from the head end of the strip on and hereby to improve the temperature control in the strip and to ensure a constant cooling temperature and consequently consistent mechanical properties over the whole length of the hot strips. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) T3 - Rolling and product treatment Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur COCKERILL SAMBRE Contribution de l’UE Aucune donnée Adresse Quai du Halage, 10 4400 FLEMALLE Belgique Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRE DE RECHERCHES METALLURGIQUES Belgique Contribution de l’UE Aucune donnée Adresse Rue Ernest Solvay, 11 4000 LIEGE Voir sur la carte Coût total Aucune donnée HOOGOVENS UGB Belgique Contribution de l’UE Aucune donnée Adresse 2, Rue des Rivaux 7100 LA LOUVIERE Voir sur la carte Coût total Aucune donnée SMS SCHLOEMANN-SIEMAG Allemagne Contribution de l’UE Aucune donnée Adresse Schweisfurth 8 57271 HILCHENBACH Voir sur la carte Coût total Aucune donnée