Obiettivo The present proposal is phase II of a currently running Pilot and Demonstration project. It is focused on the application of ultra fast cooling to thin strip. The work programme of the project includes the design, building and testing in the normal operating conditions of the hot strip mill, of a novel short cooling equipment, placed immediately behind the last rolling stand. It allows to cool the strip in a very fast and controllable way. One of the main objectives is to first design, build and test a pinch roll, placed at the exit of a cooling equipment in order to avoid the flying of the thinner strips under the influence of the cooling water pressure. This will allow to apply the cooling from the head end of the strip on and hereby to improve the temperature control in the strip and to ensure a constant cooling temperature and consequently consistent mechanical properties over the whole length of the hot strips. Programma(i) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Argomento(i) T3 - Rolling and product treatment Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore COCKERILL SAMBRE Contributo UE Nessun dato Indirizzo Quai du Halage, 10 4400 FLEMALLE Belgio Mostra sulla mappa Costo totale Nessun dato Partecipanti (3) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto CENTRE DE RECHERCHES METALLURGIQUES Belgio Contributo UE Nessun dato Indirizzo Rue Ernest Solvay, 11 4000 LIEGE Mostra sulla mappa Costo totale Nessun dato HOOGOVENS UGB Belgio Contributo UE Nessun dato Indirizzo 2, Rue des Rivaux 7100 LA LOUVIERE Mostra sulla mappa Costo totale Nessun dato SMS SCHLOEMANN-SIEMAG Germania Contributo UE Nessun dato Indirizzo Schweisfurth 8 57271 HILCHENBACH Mostra sulla mappa Costo totale Nessun dato