Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Article Category

Content archived on 2023-03-02

Article available in the following languages:

EN

Results of EU project NaPa presented

The EU Integrated Project “Emerging Nanopatterning Methods” (NaPa) held a one-day event to share its novel and exciting results on nanometre-scale fabrication with potential beneficiaries in a rich seminar programme accompanied by a small technical exhibition.

The project coordinator, Prof Jouni Ahopelto of VTT, Finland, introduced the €31 million 4-year project to over 80 participants, mainly from industry, gathered at the Magnus House in Berlin on 29th October. He highlighted the innovation and potentials of several technologies, which are now at the cross-road between applied research and uptake by industry. Speakers elaborated on exploitable results emerging from the 34 project partners in fields including: soft lithography, self-assembly, nanoimprint lithography (NIL) and MEMs-based approaches. Key results included the complete development of a new nanomanufacturing tool by SET S.A.S. in France, capable of handling 300 mm wafers and the adaptation of existing semiconductor tools by EVG in Austria, to make them suitable for nanopatterning of several materials. Development of research instrumentation for self-assembly and scanning probe-based nanofabrication were also presented. Resists for nanopatterning developed in this project are already commercially available from micro resist technology GmbH. Applications mainly in the medical area and in photonics were presented. One of the main highlights was the public debut of the NaPa Library of Processes, presented by Dr Helmut Schift of the Paul Scherrer Institute (PSI), Switzerland, which includes processes for scalable and cost-efficient manufacturing of e.g. polymer-based optical elements, organic LEDs and lab-on-a-chip systems among others. The NaPa library currently consists of eight well tried processes. The uptake of the NaPa project results will strongly impact the manufacturability in nanotechnology. The NaPa library of processes will be released in March 2008. An example of nanopatterning methods leaving the research laboratories and making inroads in industry was presented by Dr Vito Lambertini, Fiat Research Centre, Italy. He illustrated how NIL and roll-to-roll printing in particular is becoming a strong candidate in the automotive industry, addressing the innovations demands in performance, cost reduction and environmental compatibility for example, new organic light-emitting diodes for displays. In the car industry nanotechnology contributes to improvements on surface cleaning, fuel saving cells, solar panels, among others. From the tool makers, Mr Babak Heidari, CTO of Obducat in Sweden, discussed the conditions needed for high volume manufacturing and introduced proprietary concepts to meet them. He mentioned that already light sources are produced by NIL. The other promising prospects of NIL to be used in the manufacturing of magnetic drives and optical media, which requires reproducible and large area patterning with 40 nm pits, as well as the next generation of blue ray with capacity larger than 100Gb. Mr Theodor Nielsen, CEO of NIL Technology, a spin-off of the NaPa project specialised in stamp fabrication, commented on how hundreds of companies world-wide are using nanoimprint lithography in a range of industrial areas such as security, energy, paper, storage, medical and lighting. His company is “enabling commercial nano”. Mr. Mike Watts of Impattern Solutions presented an analysis of the status of NIL and commented how Europe has the whole supply chain for NIL. He illustrated the type and volume of the actual and prospective markets, which are in the US$ 1 billion per year range. He emphasised the need to establish Cost of Ownership agreements and benchmark cost for devices since tools and stamps are the most cost intensive aspects on this new technology. In his opinion the opportunities and next wave of application are in functional imprints including 3D optical surfaces and bio compatible surfaces as well as devices on integrated circuits. Europe is very well positioned to play a major role in nanomanufacturing but there is strong competition from other parts of the globe. The NaPa project has made this positioning possible, as one of the 40 most successful projects of the European Commission 6th Frame program. NaPa Integrated Project WEB site: http://www.NAPAIP.org

Countries

Austria, Belgium, Czechia, Germany, Denmark, Estonia, Greece, Spain, Finland, France, Hungary, Ireland, Italy, Lithuania, Luxembourg, Latvia, Malta, Netherlands, Poland, Portugal, Sweden, Slovenia, Slovakia, United Kingdom