Skip to main content
European Commission logo
English English
CORDIS - EU research results

Article Category

Content archived on 2024-03-25

Article available in the following languages:


Shifting to 800-volt systems: Why boosting motor power could be the key to better electric cars

The latest results from research on 800-volt battery-driven vehicles show that this could lead to smaller, lighter, and more environmentally friendly motors. Cars using these powertrains could also be charged faster and travel further on a single charge

Transport and Mobility icon Transport and Mobility
Climate Change and Environment icon Climate Change and Environment
Energy icon Energy

Sales of electric vehicles are slowly beginning to gain traction in Europe as mainstream brands including Volkswagen, BMW, Fiat, Opel and Hyundai start to roll out battery-powered models. But, despite a push by many governments to ban sales of new petrol and diesel cars in the next two decades in favour of full-electric vehicles, the existing technology in battery vehicles restricts their ranges and makes them more time-consuming to refuel than their combustion-engine rivals. This and their higher price continue to hamper their chances of becoming mainstream any time soon. For many industry observers though, developments to boost the electrical systems of battery-driven vehicles to 800-volts from the current industry standard of 400 volts could be the breakthrough that finally allows electric vehicles to move to the next level and better compete, and eventually replace, combustion vehicles. A necessary transition as Europe strives to lower vehicle emissions and tackle climate change. Professor Peter Wells, of Cardiff University’s Centre for Automotive Industry Research, says: “As is usually the case with 'premium' technology options in the automotive industry, we can expect a rapid transfer to the mass market arising from competitive pressures. In some cases, manufacturers have designed-in the ability to migrate from 400 volt to 800 volts as costs fall and as competitiveness comes to require such systems.” Among those companies who have already embraced this technology is Volkswagen Group’s sports car brand Porsche, who have fitted an 800-volt system in their full-electric Taycan sports car, which was launched last year. For Otmar Bitsche, director of e-mobility in the automaker’s research and development unit, the reasons for opting for the higher-powered unit are clear: “Lower weight, higher efficiency and faster charging” are the major benefits to 800-volt systems, he believes. Charging time can be greatly reduced when using fast chargers capable of working at up to 270 kilowatts. “If the charger provides 800 volts and a minimum of 300A, the Taycan can charge from 5% to 80% in 22.5 minutes. 400V chargers typically provide 50kW only. The same charging capacity would need 90 minutes,” Bitsche explains. The automaker, which was the first to introduce an 800-volt electrical system commercially, claims a 420-kilometre range between charges for its four-door coupe-styled saloon. While this is not hugely higher than figures achieved by rivals using 400-volt systems such as the I-Pace from Jaguar, which can cover the 354 kilometres on a single charge, the use of an 800-volt system considerably increases the possibilities to boost the range of their electric vehicles. One such advantage is that 800-volt electrical systems allow a greater retention of power, which is normally lost through heat generated during the charging process. A higher voltage system allows a lower current to be used when charging the battery, which reduces overheating and allows better power retention in the system. This power can be used towards a longer driving range. Higher voltage systems also offer a number of key weight- and mass-saving advantages. The reduction of copper is one of these. Electric motors are much simpler than combustion engines in construction and at their core they have a rotor, which turns in response to a rotating magnetic field created by electricity from the battery. To achieve this, electrical systems often use up to four times the amount of copper found in combustion engines. Using higher-voltage systems can lead to the amount of copper used in motors being significantly cut. Read the full article on:


power, electric cars, battery-driven, energy