Objectif
Hydrogen is an important factor in the EU quest to drastically reduce GHG emissions and curb its use of fossil fuels. The storage and transport of hydrogen, however, faces important challenges which hinder its broad application as an alternative and zero emission fuel. Storage of hydrogen as a gas typically requires high-pressure tanks (up to 700 bar tank pressure); storage of hydrogen as a liquid requires cryogenic temperatures because the boiling point of hydrogen at one atmosphere pressure is -253C. Therefore, for several applications, ammonia rises as a rather prominent vector if it can be produced efficiently. The production is traditionally bound by the constraints of thermodynamics, which require high synthesis pressures, as well as temperatures. Thus, NH3 is produced centralised/large-scaled.
HySTrAm builds on developing physical H2 storage materials, enabling short term storage (buffering renewables dynamics), as well as the 3 structural corner stones of flexible low pressure NH3: decreased Ru content catalysts, high temperature NH3 sorbents and induction-heated support granting (optimal) responsiveness. The project will demonstrate a compact containerised ammonia synthesis system which is based on two main consecutive stages:1) A short-term storage hydrogen vessel which will serve as a buffer to store and transport the hydrogen produced by electrolysis. Within the hydrogen vessel, new ultraporous material will be identified and optimised through machine learning technology 2) An ammonia synthesis reactor based on an improved the Haber-Bosch process where the stored hydrogen will react with nitrogen to form ammonia using the novel catalysts and sorbents developed in HySTrAm.
Champ scientifique
- natural scienceschemical scienceselectrochemistryelectrolysis
- natural sciencesphysical sciencesthermodynamics
- natural scienceschemical sciencescatalysis
- engineering and technologyenvironmental engineeringenergy and fuels
- natural sciencescomputer and information sciencesartificial intelligencemachine learning
Programme(s)
Régime de financement
HORIZON-RIA - HORIZON Research and Innovation ActionsCoordinateur
9220 Aalborg
Danemark
Voir sur la carte
Participants (14)
1930 Zaventem
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
00189 Roma
Voir sur la carte
1000 Ljubljana
Voir sur la carte
10135 Torino
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
5612 AE Eindhoven
Voir sur la carte
10623 Berlin
Voir sur la carte
2400 Mol
Voir sur la carte
6310 Izola
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
45143 Essen
Voir sur la carte
3616 Kongsberg
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
Voir sur la carte
111 42 ATHENS ATTIKIS
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
0313 Oslo
Voir sur la carte
87 805 WLOCLAWEK
Voir sur la carte
Partenaires (2)
6900 Lugano
Voir sur la carte
EC4A 4AB London
Voir sur la carte