Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

A 3D-printable biomimetic bone regeneration material

Description du projet

Greffe osseuse biomimétique en 3D

Les défauts osseux de taille critique nécessitent généralement d’autres interventions chirurgicales, car ils ne guérissent pas spontanément au cours de la vie du patient. La greffe osseuse est la méthode privilégiée pour traiter ces défauts, mais elle présente des limites, des complications et des coûts élevés. Le projet PRIOBONE, financé par le CER, propose le développement d’un matériau mimétique de l’os aux propriétés ostéo-inductives, optimisé pour la réparation osseuse. Le matériau sera imprimé en 3D, ce qui permettra de personnaliser les implants en fonction des besoins du patient. En outre, les chercheurs prévoient de créer des modèles pliables pour les procédures peu invasives. Dans l’ensemble, le projet PRIOBONE offre une solution rentable et personnalisée pour la réparation osseuse afin de répondre à la forte demande de greffes osseuses.

Objectif

Critical-size bone defects do not heal spontaneously over the patient’s lifetime and cause substantial individual, societal and economic burden. Current treatment options are hampered by associated complications, poor functional or aesthetic outcomes, a limited availability of tissue for bone grafts, and high financial costs. Worldwide, more than 4 million surgeries per year require bone grafts or substitute materials. Consequently, there is a significant clinical and economic need for novel treatments for critical-size bone defects. In PRIOBONE, we propose the validation and steps towards exploitation of our newly developed, bone-mimetic 3D-printable material for bone repair. Our PRIOBONE material has the potential to outperform current treatments and alternative solutions on the market due to its biomimetic composition, excellent cytocompatibility, osteoinductive capacity, ideal mechanical properties, and its 3D printability into any desired shape. This allows us to create implants optimized for clinical and individual patient needs. This includes, e.g. the possibility to print the material into foldable and deployable 3D designs that allow a minimally invasive insertion of the material into defect sites, where it can re-expand. The use of well-established components and our “materials-only” approach will enable a faster track to clinical application and regulatory approval in comparison to approaches containing biologicals such as cells or previously unknown components. In PRIOBONE, we will validate our material for bone regeneration, undertake a comprehensive market analysis, explore target leads and transfer pathways, and elaborate our IP strategy towards commercialization. Following successful validation, we expect that PRIOBONE will provide a cost-efficient, individualizable alternative to current treatments with the potential to significantly lower the economic, individual and social burden of critical-size bone defects.

Champ scientifique (EuroSciVoc)

Programme(s)

Thème(s)

Régime de financement

HORIZON-ERC-POC - HORIZON ERC Proof of Concept Grants

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) ERC-2023-POC

Voir tous les projets financés au titre de cet appel

Institution d’accueil

GOTTFRIED WILHELM LEIBNIZ UNIVERSITAET HANNOVER
Contribution nette de l'UE
€ 150 000,00
Adresse
WELFENGARTEN 1
30167 Hannover
Allemagne
Région
Niedersachsen Hannover Region Hannover
Type d’activité
Higher or Secondary Education Establishments
Liens
Coût total
Aucune donnée

Bénéficiaires (1)