Skip to main content

Modular high energy density sorption heat storage

Objective

High energy density sorption heat storage enables a major technological break-through for the wider penetration and capacity utilisation of renewable energy, low temperature waste heat and heat from co-generation into European energy systems. The main objective of the present project is to develop a second generation prototype of high energy density heat storage which is adapted to market demands in different European applications. The project is based on the technical achievements of the previous project HYDES.

The main features of the newly developed prototypes will be:
- Modular design in order to operate in a wide variety of applications
- Integration of key components (evaporator / condenser and the reactor) into one single container
- Factory pre-fabrication of the storage system resulting in a straight forward installation

Call for proposal

Fifth Energie C
See other projects for this call

Coordinator

FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V.
Address
Heidenhofstrasse 2
Freiburg
Germany

Participants (6)

ARBEITSGEMEINSCHAFT ERNEUERBARE ENERGIE INSTITUTE FOR SUSTAINABLE TECHNOLOGIES
Austria
Address
Feldgasse 19 - 142
Gleisdorf
ECOFYS B.V.
Netherlands
Address
Kanaalweg 16-G - 8408
Utrecht
PSE GMBH - FORSCHUNG, ENTWICKLUNG, MARKETING
Germany
Address
Christaweg 40
Freiburg
SOLPROS AVOIN YHTIOE
Finland
Address
Oltermannintie 13 A 4
Helsinki
SORTECH
Germany
Address
Hanferstrasse 28
Freiburg
SWEDISH POLYTECHNIC, FINLAND
Finland
Address
Wolffskavagen 33 - 6
Vaasa