Objective
Historic structures are often of extraordinary architecture, design or material. The conservation of such structures for next European generations is one of the main future tasks. To conserve historic structures it is more and more required to understand the deterioration processes mainly caused by the environment. In certain cases continuous monitoring systems have been installed to obtain information about the deterioration processes. However, most of these monitoring systems were just weather or air pollution data acquisition systems and use only basic models for data analysis. The real influence of the environment to the structure or the structural material is often unaccounted for. That means that the structural resistance is just calculated from the measurements and not determined by sufficient sensors. Another aspect is the fact that most monitoring systems require cabling, which is neither aesthetically appealing nor in some cases applicable due to the needed fastening techniques.
The proposed project aims at the development of competitive tools for practitioners which goes beyond the mere accumulation of data. Smart monitoring systems using wireless sensor networks, new miniature sensor technologies (e.g. MEMS) for minimally invasive installation as well as smart data processing will be developed. It will provide help in the sense of warnings (e.g. increase of damaging factors) and recommendations for action (e.g. ventilation or heating on/off, etc.) using data fusion and interpretation that is implemented within the monitoring system. The development will consist of small smart wireless and robust sensors and networks, with sensors for monitoring of e.g. temperature, humidity, air velocity, strain and crack opening, acoustic emissions, vibration, inclination, chemical attack, ambient and UV light, with built-in deterioration and material models, data pre-processing, and alarm functions to inform responsible persons about changes of the object status.
Comparative tests will be conducted to validate the models as well as the monitoring data from several case studies. The results of the project will be summarized in a toolbox and a guideline, which will be disseminated at special trainings organized for restorers, owner of cultural heritage and public authorities.
Field of science
- /natural sciences/computer and information sciences/data science/data analysis
- /natural sciences/computer and information sciences/data science/data processing
- /engineering and technology/electrical engineering, electronic engineering, information engineering/information engineering/telecommunications/wireless
- /engineering and technology/environmental engineering/air pollution engineering
- /engineering and technology/electrical engineering, electronic engineering, information engineering/electronic engineering/sensors/smart sensors
Programme(s)
Call for proposal
FP7-ENV-2007-1
See other projects for this call
Funding Scheme
CP-FP - Small or medium-scale focused research projectCoordinator
70174 Stuttgart
Germany
Participants (14)
70184 Stuttgart
70174 Stuttgart
39100 Bolzano
40126 Bologna
10785 Berlin
30239 Krakow
A-2103 Langenzersdorf
70569 Stuttgart
40128 Bologna
60131 Ancona
72100 Cittadella Della Ricerca Brindisi
- Ramallah
Amman
10000 Zagreb