Objectif
A major source of helicopter drag, about 30% of the total, is from the rotor hub. It is important that the drag generated by a helicopter, and hence emissions, is reduced. This research programme is to be undertaken to investigate this subject and investigate potential techniques to achieve reductions in hub drag. A wind tunnel test programme is to be carried out to provide a large, high-quality experimental data set. A 5 bladed scale helicopter model is to be designed and manufactured. The model will be designed to enable the effect of model geometry to be examined by using a range of 5 rotor caps and 5 hub fairings. The overall model aerodynamic loads will be measured and the loads generated by the rotor hub and rotor cap will be independently obtained using internal load cell balances. Two Particle Image Velocimetry systems, 3D and time resolved, will be employed in parallel to acquire flow field data in regions of interest around the model. A range of representative flight conditions will be simulated. These acquired data will be processed to allow the significant features of the helicopters model’s aerodynamic characteristics to be obtained. This will expose the salient sources of rotor hub drag and so identify techniques that may be employed to reduce the magnitude of this force. The data will also be available for the development and validation of CFD codes.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- ingénierie et technologiegénie mécaniquegénie automobilegénie aérospatialaviongiravion
- sciences naturellesmathématiquesmathématiques puresgéométrie
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Appel à propositions
SP1-JTI-CS-2009-02
Voir d’autres projets de cet appel
Régime de financement
JTI-CS -Coordinateur
MK41 7PF Bedford
Royaume-Uni