Skip to main content
EnglishEN
European Commission logo print header

Integrated low temperature methanol steam reforming and high temperature polymer electrolyte membrane fuel cell

Objective

Hydrogen is foreseen to be the energy vector of the future. However, there are still significant barriers to store and transport hydrogen, especially in small portable applications. The success of a portable Fuel Cell system depends to a large extent on the fuel supply that should be accomplished in a cost-effective and comfortable manner.
The present project proposes a power supply comprising a methanol steam reformer and high temperature polymer electrolyte membrane fuel cell (HT-PEMFC) operating at the same temperature. The heat integration of these two units originates an increase of up to 14% of the overall efficiency; when reformer and fuel cell operate at the same temperature, the heat involved in the endothermic steam reforming reaction can be supplied by the highly exothermic fuel cell. Moreover, the heat integration also originates a much simpler and compact unit and then robust power supply that can meet and exceed the targets defined by the project call. Because the catalyst characteristics and the low operating temperature, the reformer originates a reformate stream poor in CO (<0.1%), which increases the performance and lifetime of the fuel cell. This remarkable improvement is primarily possible because the development achieved by a team member of a very high active methanol steam reforming catalyst family that can catalyze effectively this reaction at temperatures as low as 170°C.
The new integrated power supply will be a landmark in the development of a fuel cell power supply for mass consumption.
Additionally, it is considered the development and study of a composite palladium membrane for incorporating in the reformer and of an ionic liquid supported polymer membrane selective for CO2 removal from reformate streams operating up to 200°C and the characterization of developed catalysts towards the low temperature steam reforming of dimethyl ether. These are fundamental developments needed for the foreseen new generation of combined power supplies.

Fields of science

Programme(s)

Topic(s)

Call for proposal

FCH-JU-2011-1
See other projects for this call

Funding Scheme

JTI-CP-FCH - Joint Technology Initiatives - Collaborative Project (FCH)

Coordinator

UNIVERSIDADE DO PORTO
Address
Praca gomes teixeira
4099-002 Porto
Portugal

See on map
Region
Continente Norte Área Metropolitana do Porto
Activity type
Higher or Secondary Education Establishments
Administrative Contact
Mafalda Soeiro (Ms.)
Links
EU contribution
No data

Participants (8)

Share this page

Download

Last update: 2 August 2019

My Booklet

Permalink: https://cordis.europa.eu/project/id/303476

European Union, 2023