Objective
As mentioned in the FP7 space call for Europe to be active in space in the long term, be it in earth-orbit or across the solar system, it is essential that space technologies with key capabilities are at its disposal. This goal requires developments by radical innovation which may then lead to “disruptive technologies”. In this frame new thermal shielding and low risk return strategies are defined as European key activities in the future. In Europe the design of spacecraft for high-energetic interplanetary or sample return flights is still performed with big safety margins, which means high mass. This again leads to higher costs and a reduction in scientific payloads or instrumentation.
Ablative thermal protection materials are a key technology for current and future space exploration missions. However, the mission feasibility is determined by the materials available, and the development of new materials is performed, essentially, by an iterative trial-and-error process. This is due to the absence of validated predictive models for ablative material behaviour – models are tuned to bulk material properties from tests. For each new material, this tuning has to be redone because the models are not of sufficiently high fidelity to be able to make even small extrapolations. This means that materials cannot be designed to a specification to fulfil the needs of a particular mission. The aim of this project is to make a substantial step towards a predictive model of an ablative thermal protection system by incorporating aspects of high fidelity mesoscale ablator physics within a modular framework.
In order to successfully develop such physics modules, the understanding of the fundamental processes occurring within the ablative materials must be improved. To this end, existing ablative materials will be tested in the most powerful European long duration high enthalpy facilities using both standard instrumentation and advanced measurement techniques. From the data obtained, and the state-of-the-art knowledge of ablator physical processes, modules for the specific processes of internal gas flow, internal radiation and gas-surface interaction will be developed to fit inside an overall multi-scale ablator modelling scheme. The improvements made in the representation of an ablative material will be validated against the ground testing, and this advanced ablator model will be applied to realistic flight configurations to demonstrate the impact of the enhanced physics on the understanding of real ablator performance.
The existence of this capability will allow improvements in the efficiency and cost of developing advanced new ablative materials which are tailored to meet the specifications of Europe’s future mission needs. In order to reach this objective, the ABLAMOD project brings substantial expertise from across Europe in ablator materials, thermochemistry, microfluidics, entry systems and instrumentation.
Fields of science
- natural sciencesphysical sciencesclassical mechanicsfluid mechanicsmicrofluidics
- natural sciencesphysical sciencesastronomyspace exploration
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringastronautical engineeringspacecraft
- natural scienceschemical sciencesphysical chemistrythermochemistry
Programme(s)
Call for proposal
FP7-SPACE-2012-1
See other projects for this call
Funding Scheme
CP-FP - Small or medium-scale focused research project
Coordinator
51147 Koln
Germany
See on map
Participants (9)
31402 Toulouse Cedex
See on map
00187 Roma
See on map
81043 Capua
See on map
PO10 7DX Emsworth
See on map
G1 1XQ Glasgow
See on map
1640 Sint-genesius-rode
See on map
4536 902 Mozelos Vfr
See on map
1210 Wien
See on map
8700 Leoben
See on map