Skip to main content

Powered Two-wheelers (PTW) Integrated Safety

Objective

The aim of the PISa project is to develop and implement reliable and fail-safe integrated safety systems for a range of Powered Two Wheelers, which will greatly improve the performance and primary safety (handling and stability) and can link to secondary safety devices. PTW?s are single track vehicles, which means that the rider has a more difficult vehicle to control in relation to a car, in particular when cornering or braking, and even more so in emergency situations. Only a few (high-end) motorcycle brands are fitted with ABS and (partly) combined braking systems. Optimization of the PTW brake performance will reduce the impact speed in case an accident cannot be avoided and this will directly reduce the fatality rate and injury level. Within the project PTWs will be fitted with integrated safety systems to demonstrate the potential of such systems to reduce the incidence and severity of up to 50% of PTW accidents. The specification of components of such safety systems will be defined from relevant accident mechanisms and rider assistance functions identified and from identification of existing technologies and safety systems in cars. The systems will take human reaction to information, warning and support systems in to account. The system components include sensors, a PTW state estimator, logic control, warning devices, and advanced/ intelligent actuators within brakes and suspensions elements to assist the rider. Specific sensors and actuators will be developed and integrated into an operational safety system for PTW?s to allow for driver warning and assistance and to improve handling and stability, to be innovative and beyond current state-of-the-art. The developed systems will be implemented in PTWs and evaluated by executing road and track tests and performing simulations. The cost savings in terms of reduction in accidents and injuries will be related to the costs of fitting the integrated safety systems to PTWs.

Field of science

  • /humanities/arts/modern and contemporary art/film
  • /engineering and technology/electrical engineering, electronic engineering, information engineering/electronic engineering/sensors

Call for proposal

FP6-2005-TRANSPORT-4
See other projects for this call

Funding Scheme

STREP - Specific Targeted Research Project

Coordinator

NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK
Address
Schoemakerstraat 97
6060 Delft
Netherlands

Participants (10)

UNIVERSITA DEGLI STUDI DI FIRENZE - DIPARTIMENTO DI MECCANICA E TECNOLOGIE INDUSTRIALI
Italy
Address
Piazza San Marco, 4
Firenze
LOUGHBOROUGH UNIVERSITY
United Kingdom
Address
Ashby Road
Loughborough
LUDWIG-MAXIMILIANS-UNIVERSITÄT MÜNCHEN
Germany
Address
Geschwister-scholl-platz 1
Munich
TRL LIMITED
United Kingdom
Address
Crowthorne House, Nine Mile Ride
Wokingham
IBEO AUTOMOBILE SENSOR GMBH
Germany
Address
Fahrenkroen 125
22179 Hamburg
PAIOLI MECCANICA S.P.A.
Italy
Address
Via Ronchi Inferiore 30/D
Minerbio
MALAGUTI S.P.A.
Italy
Address
Via Emilia 498
San Lazzaro Di Savena
TVS MOTOR COMPANY LTD
India
Address
Harita
Hosur
UNIRESEARCH BV
Netherlands
Address
Elektronicaweg 16C
Delft
CARVER ENGINEERING B.V.
Netherlands
Address
Einsteinstraat 50
Dordrecht